Part Datasheet Search > AD7147 Datasheet PDF
Images are for reference

AD7147 Datasheet PDF

Part Series:AD7147 Series
Description:CapTouch™ Programmable Controller for Single-Electrode Capacitance Sensors
Document:AD7147ACPZ-1500RL7 Datasheet PDF (72 Pages)

AD7147 Datasheet PDF

72 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit 24Pin LFCSP EP T/R
72 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit 24Pin LFCSP EP T/R
72 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit 24Pin LFCSP EP T/R
72 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit Automotive 24Pin LFCSP EP T/R
72 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit 24Pin LFCSP EP T/R
72 Pages
ADI
CapTouch™ Programmable Controller for Single-Electrode Capacitance Sensors
71 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit Automotive 24Pin LFCSP EP T/R
71 Pages
ADI
Capacitance to Digital Converter 0.111KSPS 16Bit Automotive 24Pin LFCSP EP T/R
70 Pages
ADI
Capacitance to Digital Converter 250KSPS 16Bit 25Pin WLCSP T/R
68 Pages
ADI
Capacitance to Digital Converter 250KSPS 16Bit 25Pin WLCSP T/R
68 Pages
ADI
Capacitance to Digital Converter 250KSPS 16Bit 25Pin WLCSP T/R

AD7147 - ADI Function Overview

Product Details
The AD7147 CapTouch™ controller is designed for use with capacitance sensors implementing functions such as buttons, scroll bars, and wheels. The sensors need only one PCB layer, enabling ultrathin applications.
The AD7147 is an integrated CDC with on-chip environmental calibration. The CDC has 13 inputs channeled through a switch matrix to a 16-bit, 250 kHz sigma-delta (Σ-Δ) converter. The CDC is capable of sensing changes in the capacitance of the external sensors and uses this information to register a sensor activation. By programming the registers, the user has full control over the CDC setup.
High resolution sensors require minor software to run on the host processor.
The AD7147 is designed for single electrode capacitance sensors (grounded sensors). There is an active shield output to minimize noise pickup in the sensor.
The AD7147 has on-chip calibration logic to compensate for changes in the ambient environment. The calibration sequence is performed automatically and at continuous intervals as long as the sensors are not touched. This ensures that there are no false or nonregistering touches on the external sensors due to a changing environment.
The AD7147 has an SPI-compatible serial interface, and the AD7147-1 has an I2C®-compatible serial interface. Both parts have an interrupt output, as well as a GPIO. There is a VDRIVE pin to set the voltage level for the serial interface independent of VCC.
The AD7147 is available in a 24-lead, 4 mm × 4 mm LFCSP and operates from a 2.6 V to 3.6 V supply. The operating current con-sumption in low power mode is typically 26 μA for 13 sensors.
Applications
Cell phones
Personal music and multimedia players
Smart handheld devices
Television, A/V, and remote controls
Gaming consoles
Digital still cameras
### Features and Benefits
Programmable capacitance-to-digital converter (CDC)
Femtofarad resolution
13 capacitance sensor inputs
9 ms update rate, all 13 sensor inputs
No external RC components required
Automatic conversion sequencer
On-chip automatic calibration logic
Automatic compensation for environmental changes
Automatic adaptive threshold and sensitivity levels
Register map is compatible with the AD7142
On-chip RAM to store calibration data
SPI-compatible (serial-peripheral-interface-compatible) serial interface (AD7147)
I2C-compatible serial interface (AD7147-1)
Separate VDRIVE level for serial interface
Interrupt output and general-purpose input/output (GPIO)
24-lead, 4 mm × 4 mm LFCSP
See datasheet for additional features
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.