AT89S52 Programming Manual

●The AT89S52-24PU is a low-power, high-performance CMOS 8-bit Microcontroller, uses Atmel"s high-density non-volatile memory technology and is compatible with the industry-standard 80C51 instruction set and pin-out. The on-chip flash allows the program memory to be reprogrammed in-system or by a conventional non-volatile memory programmer. By combining a versatile 8-bit CPU with in-system programmable flash on a monolithic chip, the Atmel AT89S52-24PU is a powerful microcontroller which provides a highly-flexible. It provides the following standard features 32 I/O lines, Watchdog timer, two data pointers, three 16-bit timer/counters, a six-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator and clock circuitry. In addition, the microcontroller is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes.

● Compatible with MCS®-51 Products

● 8kb of In-system Programmable (ISP) Flash Memory, 10,000 Write/Erase Cycles Endurance

● 0Hz to 33MHz Fully Static Operation

● Three-level Program Memory Lock

● 256 x 8-bit Internal RAM

● 32 Programmable I/O Lines

● Three 16-bit Timer/Counters

● Eight Interrupt Sources

● Full Duplex UART Serial Channel

● Low-power Idle and Power-down Modes

● Interrupt Recovery from Power-down Mode

● Watchdog Timer

● Dual Data Pointer

● Power-off Flag

● Fast Programming Time

● Flexible ISP Programming (Byte and Page Mode)