CC1020 Datasheet PDF

●CC1020 is a true single-chip UHF transceiver designed for very low-power and very low-voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 402-, 424-, 426-, 429-, 433-, 447-, 449-, 469-, 868-, 915-, and 960-MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 960-MHz range.

●The CC1020 device is especially suited for narrow-band systems with channel spacing of 12.5 or 25 kHz complying with ARIB STD-T67 and EN 300 220.

●The main operating parameters of the CC1020 device can be programmed with a serial bus, thus making CC1020 a very flexible and easy-to-use transceiver.

●In a typical system, the CC1020 device will be used together with a microcontroller and a few external passive components.

●TI recommends using the latest RF performance line device CC1120 as successor of CC1020: www.ti.com/rfperformanceline

● True Single Chip UHF RF Transceiver

● Frequency Range 402 MHz to 470 MHz and

●804 MHz to 960 MHz

● High Sensitivity

● Up to –118 dBm for a 12.5 kHz Channel

● Programmable Output Power

● Low Current Consumption

● RX: 19.9 mA

● Low Supply Voltage

● 2.3 V to 3.6 V

● No External IF Filter Needed

● Low-IF Receiver

● Very Few External Components Required

● Small Size

● QFN 32 Package

● Pb-Free Package

● Digital RSSI and Carrier Sense Indicator

● Data Rate up to 153.6 kBaud

● OOK, FSK, and GFSK Data Modulation

● Integrated Bit Synchronizer

● Image Rejection Mixer

● Programmable Frequency and AFC Make Crystal

●Temperature Drift Compensation Possible Without

●TCXO

● Suitable for Frequency Hopping Systems

● Suited for Systems Targeting Compliance With

●EN 300 220, FCC CFR47 Part 15, ARIB STD-T67,

●and ARIB STD-T96

● Development Kit Available

● Easy-to-Use Software for Generating the CC1020

●Configuration Data