●The DRV603PW is a 3-VRMS pop-free stereo line driver designed to allow the removal of the output dc-blocking capacitors for reduced component count and cost. The device is ideal for single-supply electronics where size and cost are critical design parameters.
●Designed using TI’s patented DirectPath™ technology, The DRV603 is capable of driving 3 Vrms into a 2.5-k load with 5-V supply voltage. The device has differential inputs and uses external gain-setting resistors to support a gain range of ±1 V/V to ±10 V/V, and line outputs that have ±8 kV IEC ESD protection. The DRV603 (occasionally referred to as the ‘603) has built-in shutdown control for pop-free on/off control. The DRV603 has an external and internal undervoltage detector that mutes the output.
●Using the DRV603 in audio products can reduce component count considerably compared to traditional methods of generating a 3-Vrms output. The DRV603 does not require a power supply greater than 5 V to generate its 8.5-Vpp output, nor does it require a split-rail power supply. The DRV603 integrates its own charge pump to generate a negative supply rail that provides a clean, pop-free ground biased 3-Vrms output.
●The DRV603 is available in a 14-pin TSSOP.
●If the low noise and trimmed dc-offset and external undervoltage mute function are not beneficial in the application, TI recommends the footprint compatible DRV602.
● DirectPath
● Eliminates Pop/Clicks
● Eliminates Output DC-Blocking Capacitors
● Provides Flat Frequency Response 20 Hz–20 kHz
● Low Noise and THD
● SNR > 109 dB
● Typical Vn < 7 µVms
● THD+N < 0.002%
● Output Voltage Into 2.5-k Load
● 2 Vrms With 3.3-V Supply Voltage
● 3 Vrms With 5-V Supply Voltage
● Differential Input
● External Undervoltage Mute
● APPLICATIONS
● PDP / LCD TV
● Blu-ray Disc, DVD Players
● Home Theater in a Box
● Set-Top Boxes
