●The DRV8835DSSR is a 1.5A Low Voltage Stepper or Single/Dual Brushed DC Motor Driver with dual supplies (PWM or PH/EN Ctrl), provides an integrated motor driver solution. The device has two H-bridge drivers and can drive two DC motors or one stepper motor, as well as other devices like solenoids. The output driver block for each consists of N-channel power MOSFET"s configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate drive voltages. It can supply up to 1.5A of output current per H-bridge. It operates on a motor power supply voltage from 0 to 11V and a device power supply voltage of 2 to 7V. PHASE/ENABLE and IN/IN interfaces can be selected which are compatible with industry-standard devices. Internal shutdown functions are provided for over-current protection, short circuit protection, under voltage lockout and over-temperature.
● Dual H-Bridge motor driver
● Capable of driving two DC motors or one stepper motor
● HS + LS 305mR Low MOSFET on-resistance
● 1.5A Maximum drive current per H-Bridge
● Bridges may be paralleled for 3A drive current
● 0 to 11V Motor-operating supply-voltage range
● 2 to 7V Logic supply-voltage range
● Separate logic and motor power supply pins
● Flexible PWM or PHASE/ENABLE interface
● Low power sleep mode with 95nA maximum supply current
● Green product and no Sb/Br
