Part Datasheet Search > GD75232 Datasheet PDF
Images are for reference

GD75232 Datasheet PDF

Part Series:GD75232 Series
Description:IC RS-232 DRIVER/REC 20-TSSOP
Document:GD75232PWG4 Datasheet PDF (31 Pages)

GD75232 Datasheet PDF

26 Pages
TI
TEXAS INSTRUMENTS GD75232DBR RS232 Transceiver IC, 3 Drivers, 120Kbps, 4.5V to 5.5V, SSOP-20
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin TSSOP Tube
26 Pages
TI
TEXAS INSTRUMENTS GD75232N RS232 Transceiver IC, 4 Drivers, 120Kbps, 4.5V to 5.5V, DIP-20
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin TSSOP T/R
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin TSSOP T/R
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin SOIC T/R
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin SSOP T/R
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin SOIC T/R
26 Pages
TI
IC MULT RS-232 DRV/REC 20TSSOP
26 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin SOIC T/R
23 Pages
TI
IC RS-232 DRIVER/REC 20-TSSOP
22 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin SSOP T/R
20 Pages
TI
Triple Transmitter Quint Receiver RS-232 20Pin SSOP

GD75232 - TI Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Case/Package
TSSOP-20
show more

GD75232 - TI Function Overview

The GD65232 and GD75232 combine three drivers and five receivers from the Texas Instruments trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required, and allow easy interconnection of the UART and serial-port connector of an IBM. PC/AT and compatibles. The bipolar circuits and processing of the GD65232 and GD75232 provide a rugged, low-cost solution for this function at the expense of quiescent power and external passive components relative to the SN75C185.
The GD65232 and GD75232 comply with the requirements of the TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signaling rates up to 20 kbit/s. The switching speeds of these devices are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be expected unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards is recommended.
Single Chip With Easy Interface Between UART and
Serial-Port Connector of IBM™ PC/AT and Compatibles
Meet or Exceed the Requirements of TIA/EIA-232-F and ITU v.28 Standards
Designed to Support Data Rates up to 120 kbit/s
Pinout Compatible With SN75C185 and SN75185
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.