LM2903 Datasheet PDF

●These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships.

●The LM193 device is characterized for operation from −55°C to 125°C. The LM293 and LM293A devices are characterized for operation from −25°C to 85°C. The LM393 and LM393A devices are characterized for operation from 0°C to 70°C. The LM2903 device is characterized for operation from −40°C to 125°C.

● Single-Supply or Dual Supplies

● Wide Range of Supply Voltage

● Maximum Rating: 2 V to 36 V

● Tested to 30 V: Non-V Devices

● Tested to 32 V: V-Suffix Devices

● Low Supply-Current Drain Independent of Supply

●Voltage: 0.4 mA (Typical) Per Comparator

● Low Input Bias Current: 25 nA (Typical)

● Low Input Offset Current: 3 nA (Typical) (LM139)

● Low Input Offset Voltage: 2 mV (Typical)

● Common-Mode Input Voltage Range

●Includes Ground

● Differential Input Voltage Range Equal to

●Maximum-Rated Supply Voltage: ±36 V

● Low Output Saturation Voltage

● Output Compatible With TTL, MOS, and CMOS

● On Products Compliant to MIL-PRF-38535,

●All Parameters Are Tested Unless Otherwise

●Noted. On All Other Products, Production

●Processing Does Not Necessarily Include

●Testing of All Parameters.