LM6152 Datasheet PDF

●The LM6152BCM/NOPB is a dual Operational Amplifier with rail-to-rail input and output. Using patented circuit topologies, the LM6152 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 1.4mA/amplifier supply current, the 75MHz gain bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The slew rate of the devices increases with increasing input differential voltage, thus allowing the device to handle capacitive loads while maintaining large signal amplitude. The LM6152 can be driven by voltages that exceed both power supply rails, thus eliminating concerns about exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages.

● Fast settling time of 1.1µs for 2V step (to 0.01%)

● 0.01 to 4.99V Rail-to-rail output swing

● 1.4mA/amplifier Low supply current

● 10µV/°C Typical offset drift

● 91dB PSRR

● 84dB CMRR

● Green product and no Sb/Br