Part Datasheet Search > Logic ICs > SN74LVC8T245 Datasheet PDF
Images are for reference

SN74LVC8T245 Datasheet PDF

Part Series:SN74LVC8T245 Series
Category:Logic ICs
Description:Transceiver, 74LVC8T245, 1.65V to 5.5V, TSSOP-24
Document:SN74LVC8T245MDWREP Datasheet PDF (794 Pages)

SN74LVC8T245 Datasheet PDF Logic ICs

34 Pages
TI
8Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and Three-State Outputs 24-VQFN -40℃ to 85℃
34 Pages
TI
IC: digital; 8Bit, bus transceiver; Channels:8; SMD; TSSOP24
34 Pages
TI
Transceiver, 74LVC8T245, 1.65V to 5.5V, SSOP-24
34 Pages
TI
Bus Transceiver, LVC Family, 8Input, 50mA, 4.3ns, 1.65V to 5.5V, SOIC-24
34 Pages
TI
Bus Transceiver, LVC Family, 8Input, 8Bit, 32mA, 4.3ns, 1.65V to 5.5V, TSSOP-24
34 Pages
TI
Bus Transceiver, LVC Family, 8Input, 8Bit, 32mA, 4.3ns, 1.65V to 5.5V, TSSOP-24
34 Pages
TI
Bus Transceiver, LVC Family, 8Input, 8Bit, 32mA, 4.3ns, 1.65V to 5.5V, TVSOP-24
34 Pages
TI
Bus Transceiver, LVC Family, 8Input, 8Bit, 32mA, 4.3ns, 1.65V to 5.5V, TSSOP-24
34 Pages
TI
8Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and Three-State Outputs 24-SO -40℃ to 85℃
34 Pages
TI
8Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and Three-State Outputs 24-SSOP -40℃ to 85℃
34 Pages
TI
8Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and Three-State Outputs 24-SOIC -40℃ to 85℃
34 Pages
TI
TEXAS INSTRUMENTS SN74LVC8T245PWE4 Bus Transceiver, LVC Family, 8Input, 8Bit, 32mA, 4.3ns, 1.65V to 5.5V, TSSOP-24
26 Pages
TI
Bus XCVR Single 8CH 3-ST 24Pin TSSOP T/R
14 Pages
TI
IC: digital; 8Bit, bus transceiver; SMD; TSSOP24; Series:74LVC

SN74LVC8T245PWR - TI Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Number of Pins
24 Pin
Supply Voltage (DC)
1.65V ~ 5.50V
Case/Package
TSSOP-24
Number of Outputs
8 Output
show more

SN74LVC8T245PWR - TI Function Overview

The SN74LVC8T245PWR is a 8-bit dual-supply Bus Transceiver with configurable voltage-level shifting and 3-state outputs. This 8-bit non-inverting bus transceiver uses two separate configurable power-supply rails. It is optimized to operate with VCCA and VCCB set at 1.65 to 5.5V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 to 5.5V. The B port is designed to track VCCB. It is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ.
Control inputs VIH/VIL levels are referenced to VCCA voltage
VCC Isolation - If either VCC input is at GND, all are in the high-impedance state
Fully configurable dual-rail design allows port to operate over the full 1.65 to 5.5V supply range
Latch-up performance exceeds 100mA per JESD 78, class II
Green product and no Sb/Br
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.