Part Datasheet Search > TAS5717 Datasheet PDF
Images are for reference

TAS5717 Datasheet PDF

Part Series:TAS5717 Series
Description:10W/15W Digital Audio Power Amplifier with Integrated Cap-Free HP Amplifier
Document:TAS5717PHP Datasheet PDF (69 Pages)

TAS5717 - TI Specifications

TYPE
DESCRIPTION
Case/Package
HTQFP-48
show more

TAS5717 - TI Function Overview

The TAS5717/TAS5719 is a 10-W/15-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.
The TAS5717/9 is a slave-only device receiving all clocks from external sources. The TAS5717/TAS5719 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.
Audio Input/Output
TAS5717 Supports 2×10 W and TAS5719 Supports 2×15 W Output
Wide PVDD Range, From 4.5 V to 26 V
Efficient Class-D Operation Eliminates Need for Heatsinks
Requires Only 3.3 V and PVDD
One Serial Audio Input (Two Audio Channels)
I2C Address Selection via PIN (Chip Select)
Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
External Headphone-Amplifier Shutdown Signal
Integrated CAP-Free Headphone Amplifier
Stereo Headphone (Stereo 2-V RMS Line Driver) Outputs
Audio/PWM Processing
Independent Channel Volume Controls With 24-dB to Mute
Programmable Two-Band Dynamic Range Control
14 Programmable Biquads for Speaker EQ
Programmable Coefficients for DRC Filters
DC Blocking Filters
0.125-dB Fine Volume Support
General Features
Serial Control Interface Operational Without MCLK
Factory-Trimmed Internal Oscillator for Automatic Rate Detection
Surface Mount, 48-Pin, 7-mm × 7-mm HTQFP Package
AD, BD, and Ternary PWM-Mode Support
Thermal and Short-Circuit Protection
Benefits
EQ: Speaker Equalization Improves Audio Performance
DRC: Dynamic Range Compression. Can Be Used As Power Limiter.
Enables Speaker Protection, Easy Listening, Night-Mode Listening
DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors,
Dedicated Active Headpone Mute Pin, High Signal-to-Noise Ratio
Two-Band DRC: Set Two Different Thresholds for Low- and
High-Frequency Content
FilterPro is a trademark of Texas Instruments.
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.