Part Datasheet Search > TPA3118D2 Datasheet PDF
Images are for reference

TPA3118D2 Datasheet PDF

Part Series:TPA3118D2 Series
Description:30W Stereo (BTL) Class-D Audio Amp w/ SpeakerGuard™
Document:TPA3118D2QDAPRQ1 Datasheet PDF (65 Pages)

TPA3118D2 Datasheet PDF

44 Pages
TI
30W Stereo (BTL) Class-D Audio Amp w/ SpeakerGuard™

TPA3118D2 - TI Function Overview

The TPA31xxD2 series are stereo efficient, digital amplifier power stage for driving speakers up to 100 W / 2 Ω in mono. The high efficiency of the TPA3130D2 allows it to do 2 × 15 W without external heat sink on a single layer PCB. The TPA3118D2 can even run 2 × 30 W / 8 Ω without heat sink on a dual layer PCB. If even higher power is needed the TPA3116D2 does 2 × 50 W / 4 Ω with a small heat-sink attached to its top side PowerPAD. All three devices share the same footprint enabling a single PCB to be used across different power levels.
The TPA31xxD2 advanced oscillator/PLL circuit employs a multiple switching frequency option to avoid AM interferences; this is achieved together with an option of either master or slave option, making it possible to synchronize multiple devices.
The TPA31xxD2 devices are fully protected against faults with short-circuit protection and thermal protection as well as overvoltage, undervoltage, and DC protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.
Supports Multiple Output Configurations
2 × 50 W Into a 4-Ω BTL Load at 21 V (TPA3116D2)
2 × 30 W Into a 8-Ω BTL Load at 24 V (TPA3118D2)
2 × 15 W Into a 8-Ω BTL Load at 15 V (TPA3130D2)
Wide Voltage Range: 4.5 V to 26 V
Efficient Class-D Operation
>90% Power Efficiency Combined With Low Idle Loss Greatly Reduces Heat Sink Size
Advanced Modulation Schemes
Multiple Switching Frequencies
AM Avoidance
Master and Slave Synchronization
Up to 1.2-MHz Switching Frequency
Feedback Power-Stage Architecture With High PSRR Reduces PSU Requirements
Programmable Power Limit
Differential and Single-Ended Inputs
Stereo and Mono Mode With Single-Filter Mono Configuration
Single Power Supply Reduces Component Count
Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, DC-Detect, and Short Circuit With Error Reporting
Thermally Enhanced Packages
DAD (32-Pin HTSSOP Pad Up)
DAP (32-Pin HTSSOP Pad Down)
–40°C to 85°C Ambient Temperature Range
All trademarks are the property of their respective owners.
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.