Part Datasheet Search > TPA6138A2 Datasheet PDF
Images are for reference

TPA6138A2 Datasheet PDF

Part Series:TPA6138A2 Series
Description:DIRECTPATH Headphone Driver with Adjustable Gain 14-TSSOP -40℃ to 85℃
Document:TPA6138A2EVM Datasheet PDF (30 Pages)

TPA6138A2 - TI Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Case/Package
TSSOP-14
show more

TPA6138A2 - TI Function Overview

The TPA6138A2 is a pop-free stereo headphone amplifier designed to allow the removal of the output dc-blocking capacitors for reduced component count and cost. The device is ideal for single-supply electronics where size and cost are critical design parameters.
Designed using TI’s patented DirectPath™ technology, The TPA6138A2 is capable of driving 25 mW into a 32-Ω load with 3.3-V supply voltage. The device has differential inputs and uses external gain-setting resistors that supports a gain range of ±1 V/V to ±10 V/V. Gain can be configured individually for each channel. The device can also be configured as a second-order low-pass filter and is ideal for interfacing with PWM audio sources. Audio output compiles with ±8-kV IEC ESD protection, requiring just a simple resistor-capacitor ESD protection circuit. The TPA6138A2 has built-in active-mute control for pop-free audio on/off control. The TPA6138A2 has an external undervoltage detector that mutes the output when the power supply is removed, ensuring a pop-free shutdown.
Using the TPA6138A2 in audio products can reduce component count considerably compared to traditional headphone amplifiers. The TPA6138A2 does not require a split-rail power supply or a dc blocking capacitor. The TPA6138A2 integrates its own charge pump to generate a negative supply rail that provides a clean, pop-free ground-biased audio signal.
The TPA6138A2 is available in a 14-pin TSSOP.
Stereo DirectPath™ Headphone Amplifier
40 mW Into 32 Ω With 3.3-V Supply
Low THD+N < 0.01% at 10 mW Into 32 Ω
High SNR, >90 dB
Differential Input and Single-Ended Output
Adjustable Gain by External Gain-Setting
Resistors
Configurable as a Second-Order Low-Pass Filter
Ideal for PWM Audio Sources
Low DC Offset, <1 mV
Ground-Referenced Outputs Eliminate DC-
Blocking Capacitors
Reduce Board Area
Reduce Component Cost
Improve THD+N Performance
No Degradation of Low-Frequency Response
Due to Output Capacitors
Short-Circuit Protection
Click- and Pop-Reduction Circuitry
External Undervoltage Mute
Active Mute Control for Pop-Free Audio On/Off
Control
Space-Saving TSSOP Package
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.