Part Datasheet Search > TPS40200 Datasheet PDF
Images are for reference

TPS40200 Datasheet PDF

Part Series:TPS40200 Series
Description:the tps40200 is a flexible non-synchronous controller with a built in 200mA driver for p-channel fets. the circuit o...
Document:TPS40200DR Datasheet PDF (49 Pages)

TPS40200 Datasheet PDF

49 Pages
TI
DC-DC Controller (External Switch) Wide Input Non-Synchronous Buck DC-DC Controller DC DC Cntrlr Single-OUT Step Down 4.5V to 52V Input 8Pin VSON EP T/R
49 Pages
TI
TEXAS INSTRUMENTS TPS40200DRG4 DC-DC Controller, Voltage Mode, 4.5V to 52V, 1 Output, Buck, 500kHz, SOIC-8
49 Pages
TI
TEXAS INSTRUMENTS TPS40200EVM-001 Evaluation Module, DC-DC Buck Converter, 2.5A, Single P Channel MOSFET and Single Rectifier
49 Pages
TI
TPS40200 DC to DC Controller 3.2VDC to 3.4VDC Output Evaluation Board
49 Pages
TI
TEXAS INSTRUMENTS TPS40200DG4 DC-DC Controller, Voltage Mode, 4.5V to 52V, 1 Output, Buck, 500kHz, SOIC-8
49 Pages
TI
the tps40200 is a flexible non-synchronous controller with a built in 200mA driver for p-channel fets. the circuit o...
48 Pages
TI
Voltage Mode PWM Controller 0.7V to 45.24V 260mA 35kHz to 500kHz 8Pin SOIC Tube
48 Pages
TI
Voltage Mode PWM Controller 0.7V to 45.24V 260mA 35kHz to 500kHz 8Pin CFPAK Tube
48 Pages
TI
Switching Controllers DC-DC Controller 8-SOIC -55 to 175
48 Pages
TI
Voltage Mode PWM Controller 0.7V to 45.24V 260mA 35kHz to 500kHz 8Pin CFP Tube
48 Pages
TI
Voltage Mode PWM Controller 0.7V to 45.24V 260mA 35kHz to 500kHz XCEPT
43 Pages
TI
TEXAS INSTRUMENTS TPS40200MDREP DC-DC Controller, Voltage Mode, 4.5V to 52V, 1 Output, Buck, 500kHz, SOIC-8
43 Pages
TI
DC-DC Cntrlr Single-OUT Step Down 500kHz 8Pin SOIC T/R
43 Pages
TI
The TPS40200 is a flexible nonsynchronous controller with a built-in 200mA driver for P-channel FETs
40 Pages
TI
TEXAS INSTRUMENTS TPS40200QDRQ1 DC-DC Controller, Voltage Mode, 4.5V to 52V, 1 Output, Buck, 500kHz, SOIC-8

TPS40200 - TI Specifications

TYPE
DESCRIPTION
Case/Package
SOIC-8
show more

TPS40200 - TI Function Overview

The TPS40200 is a flexible, non-synchronous controller with a built-in 200-mA driver for P-channel FETs. The circuit operates with inputs up to 52 V with a power-saving feature that turns off driver current once the external FET has been fully turned on. This feature extends the flexibility of the device, allowing it to operate with an input voltage up to 52 V without dissipating excessive power. The circuit operates with voltage-mode feedback and has feed-forward input voltage compensation that responds instantly to input voltage change. The integral 700-mV reference is trimmed to 2%, providing the means to accurately control low voltages. The TPS40200 is available in an 8-pin SOIC and an 8-pin VSON package and supports many of the features of more complex controllers. Clock frequency, soft-start, and overcurrent limits are each easily programmed by a single, external component. The part has undervoltage lockout, and can be easily synchronized to other controllers or a system clock to satisfy sequencing and/or noise-reduction requirements.
Input Voltage Range 4.5 V to 52 V
Output Voltage (700 mV to 90% VIN)
200-mA Internal P-channel FET Driver
Voltage Feed-Forward Compensation
Undervoltage Lockout
Programmable Fixed-Frequency (between 35 kHz
and 500 kHz) Operation
Programmable Short-Circuit Protection
Hiccup Overcurrent Fault Recovery
Programmable Closed-Loop Soft-Start
700 mV 1% Reference Voltage
External Synchronization
Small 8-Pin SOIC (D) and VSON (DRB) Packages
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.