Part Datasheet Search > UC2854 Datasheet PDF
Images are for reference

UC2854 Datasheet PDF

Part Series:UC2854 Series
Description:the uc1854 provides active power factor correction for power systems that otherwise would draw non-sinusoidal current...
Document:UC2854BMDWREP Datasheet PDF (38 Pages)

UC2854 Datasheet PDF

27 Pages
TI
Power Factor Correction PREREGUL 1.5mA 118kHz 16Pin SOIC Tube
27 Pages
TI
Power Factor Correction PREREGUL 1.5mA 118kHz 16Pin SOIC T/R
27 Pages
TI
Power Factor Correction PREREGUL 1.5mA 118kHz 16Pin SOIC Tube
27 Pages
TI
the uc1854 provides active power factor correction for power systems that otherwise would draw non-sinusoidal current...
23 Pages
TI
TEXAS INSTRUMENTS UC2854ADWG4 PFC Controller IC, 10V to 20V & 12mA Supply, 10V Lockout, 95% Duty Cycle, 102kHz, SOIC-16
19 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin SOIC Tube
18 Pages
TI
PFC Controller IC, 10V to 20V & 12mA supply, 10.5V Lockout, 95% Duty Cycle, 200kHz, SOIC-16
18 Pages
TI
PFC Controller IC, 10V to 20V & 12mA Supply, 10V Lockout, 95% Duty Cycle, 200kHz, SOIC-16
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin PDIP Tube
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin PDIP Tube
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin SOIC T/R
18 Pages
TI
TEXAS INSTRUMENTS UC2854BDWG4 PFC Controller IC, 10V to 20V & 12mA Supply, 10V Lockout, 95% Duty Cycle, 102kHz, SOIC-16
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin SOIC T/R
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin PDIP Tube
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 20Pin PLCC
18 Pages
TI
Power Factor Correction PREREGUL 0.3mA 115kHz 16Pin PDIP Tube

UC2854 - TI Function Overview

The UC1854 provides active-power factor correction for power systems that otherwise would draw non-sinusoidal current from sinusoidal power lines. This device implements all the control functions necessary to build a power supply capable of optimally using available power-line current while minimizing line-current distortion. To do this, the UC1854 contains a voltage amplifier, an analog multiplier and divider, a current amplifier, and a fixed-frequency PWM.
In addition, the UC1854 contains a power MOSFET-compatible gate driver, 7.5-V reference, line anticipator, load-enable comparator, low-supply detector, and overcurrent comparator.
The UC1854 uses average current-mode control to accomplish fixed-frequency current control with stability and low distortion. Unlike peak current-mode, average current control accurately maintains sinusoidal line current without slope compensation and with minimal response to noise transients.
The high reference voltage and high oscillator amplitude of the UC1854 minimize noise sensitivity while fast PWM elements permit chopping frequencies above 200 kHz. The UC1854 is used in single-phase and three-phase systems with line voltages that vary from 75 V to 275 V and line frequencies across the 50-Hz to 400-Hz range. To reduce the burden on the circuitry that supplies power to this device, the UC1854 features low starting supply current.
These devices are available packaged in 16-pin plastic and ceramic dual in-line packages, and a variety of surface-mount packages.
Control Boost PWM to 0.99 Power Factor
Limit Line-Current Distortion to < 5%
World-Wide Operation Without Switches
Feedforward Line Regulation
Average Current-Mode Control
Low Noise Sensitivity
Low Startup Supply Current
Fixed-Frequency PWM Drive
Low-Offset Analog Multiplier and Divider
1-A Totem-Pole Gate Driver
Precision Voltage Reference
show more
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.