600 Series Encoder, 30 Ma Current Rating, 5 VDC (Nom.) Voltage Rating
●The series 600 controls are manually operated, rotary, optical encoders that output two square waves in quadrature at a rate of 128 pulses per channel per revolution as a standard with other resolutions down to 60 pulses available. The outputs are TTL compatible. The variation in this series is in the terminal configuration: either pin leads or cable leads.
●Specifications. Input Power:
● 5 volts DC ±5% @ 30 MA max. plus external requirements.
● Output Rate
● 128 pulses/revolution per channel-standard; Other pulses/revolution between 60 and 128 are available.
● Channels:
● Two separate output channels in quadrature, 90° ±45°.
● Output Voltage:
● High level voltage — 2.4 volts min. with 10 KΩ load to ground; Low level voltage — 0.4 volt max.
● Operating Temp:
● -20°C to +65°.
● Vibration:
● 10 to 2000 Hz, 15 G peck; MIL-STD-202 method 204 test C.
● Shock:
● 100 G @ 6 ms MIL-STD-202 method 213 condition 1.
● Mechanical Characteristics. Shaft Rotation:
● Continuous in either direction.
● Operating Speed:
● 300 rpm max.
● Rotational Life:
● 10 million revolutions.
● Rotational Torque:
● 1.5 ozs. in max.
● Shaft:
● 1/4 diameter standard, stainless steel.
● Bushing:
● 3/8 diameter standard, brass, nickel plated.
● Terminals:
● P/C Type — 0.25 by 0.12 thick brass, gold plated to facilitate soldering. Cable Type — Four lead ribbon cables, color-coded, with 0.050 spacing, 28 AWG stranded copper wire, 0.39 diameter.
● Strength:
● Terminals withstand 2 Lbs. push and pull and a 90° bend.
● Mounting Hardware (not supplied):
● For 3/8 bushing, use hex mounting nut 3/8 × 32 thread, 1/2 across flats, 3/32 thick; internal tooth lockwasher 11/16 O.D. by 0.022 thick.
● Seals:
● Mounting seal and shaft seal available. Controls are not sealed for board washing.
● Weight:
● P/C type or cable type. 1 in. FMS shaft and 3/8 bushing-0.046 Lb. (21 G).
● Loc. Pin (Not Standard):
● Single pin located 17/32 from center can be supplied.
● Optical Incremental Encoders
● Analog to Digital Converters
● TTL Compatible All Models
● Only 1.125" Diameter × 0.484" Deep
