74ALVC164245DLG4 Datasheet PDF - TI

DESCRIPTION/ORDERING INFORMATION

●This 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails. B port has VCCB, which is set to operate at 3.3 V and 5 V. A port has VCCA, which is set to operate at 2.5 V and 3.3 V. This allows for translation from a 2.5-V to a 3.3-V environment, and vice versa, or from a 3.3-V to a 5-V environment, and vice versa.

●The SN74ALVC164245 is designed for asynchronous communication between data buses. The control circuitry (1DIR, 2DIR, 1OE, and 2OE) is powered by VCCA. To ensure the high-impedance state during power up or power down, the output-enable (OE) input should be tied to VCC

●through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

●FEATURES

●• Member of the Texas Instruments Widebus™ Family

●• Max tpd of 5.8 ns at 3.3 V

●• ±24-mA Output Drive at 3.3 V

●• Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage

●• Latch-Up Performance Exceeds 250 mA Per JESD 17