TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Frequency | 70 MHz |
Number of Pins | 16 Pin |
Supply Voltage (DC) | 5.00 V, 5.50 V (max) |
Case/Package | SOIC-16 |
Output Current | 4 mA |
Number of Circuits | 2 Circuit |
Number of Positions | 16 Position |
Number of Bits | 1 Bit |
Polarity | Non-Inverting, Inverting |
Operating Temperature (Max) | 125 ℃ |
Operating Temperature (Min) | -40 ℃ |
Supply Voltage (Max) | 5.5 V |
Supply Voltage (Min) | 4.5 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Unknown |
Packaging | Each |
Size-Length | 10 mm |
Size-Width | 4 mm |
Size-Height | 1.45 mm |
The 74HCT112D is a negative-edge trigger dual Jk Flip-flop with set and reset. This high-speed Si-gate CMOS device is pin compatible with low power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard no. 7A. This dual negative-edge triggered JK-type flip-flops featuring individual nJ, nK, clock (nCP\\), set (nSD\\) and reset (nRD\\) inputs. The set and reset inputs, when low, set or reset the outputs as shown in the function table regardless of the levels at the other inputs. A HIGH level at the clock (nCP) input enables the nJ and nK inputs and data will be accepted. The nJ and nK inputs control the state changes of the flip-flops as shown in the function table. The nJ and nK inputs must be stable one set-up time prior to the high-to-low clock transition for predictable operation. Output state changes are initiated by the high-to-low transition of nCP. Schmitt-trigger action in the clock input makes the circuit highly tolerant to slower clock rise and fall times.
● Asynchronous set and reset
● Standard output capability
● ICC Category
NXP
Dual Flip-flop With Reset; Negative-edge Trigger
NXP
NXP 74HCT112D Flip-Flop, Complementary Output, Negative Edge, 74HCT112, JK, 21ns, 70MHz, 4mA, SOIC
Nexperia
IC JK TYPE NEG TRG DUAL 16SOIC
Nexperia
IC JK TYPE NEG TRG DUAL 16TSSOP
NXP
Flip Flop JK-Type Neg-Edge 2Element 16Pin TSSOP Bulk
Nexperia
IC JK TYPE NEG TRG DUAL 16SOIC
NXP
NXP 74HCT112D,652 Flip-Flop, Non Inverted, Negative Edge, 74HCT112, JK, 19ns, 70MHz, 4mA, SOIC
Nexperia
IC: digital; JK flip-flop; Channels:2; Inputs:5; HCT; SMD; SO16
NXP
Flip Flop JK-Type Neg-Edge 2Element 16Pin PDIP Bulk
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.