General description
●The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output.
●The master reset (MR) is an asynchronous active LOW input and operates independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D input must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation.
●The inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment.
●This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
●Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times.
●Features
●■ Wide supply voltage range from 1.65 V to 5.5 V
●■ 5 V tolerant inputs for interfacing with 5 V logic
●■ High noise immunity
●■ Complies with JEDEC standard:
● ◆ JESD8-7 (1.65 V to 1.95 V)
● ◆ JESD8-5 (2.3 V to 2.7 V)
● ◆ JESD8B/JESD36 (2.7 V to 3.6 V).
●■ ±24 mA output drive (VCC = 3.0 V)
●■ ESD protection:
● ◆ HBM JESD22-A114E exceeds 2000 V
● ◆ MM JESD22-A115-A exceeds 200 V.
●■ CMOS low power consumption
●■ Latch-up performance exceeds 250 mA
●■ Direct interface with TTL levels
●■ Inputs accept voltages up to 5 V
●■ Multiple package options
●■ Specified from −40 °C to +85 °C and −40 °C to +125 °C.
