SPDT Contact Form, Snap-Acting Momentary Pushbutton Switches
● Bushings:
● Brass, nickel-plated.
● Plungers:
● Glass-filled nylon.
● Cap and Bezel:
● Black nylon.
● Case:
● Red diallyl phthalate.
● Operating Temperature:
● –30°C to 65°C.
● Included Hardware:
● Two nuts, locking-ring and lockwasher, where applicable.
●8X25 Models. Contact Rating:
● 0.4 VA max. at 20 VAC or VDC max.
● Contacts and Terminals:
● Brass with gold-plate over nickel-plate.
●8X21 Models. Contact Rating:
● 1 amp at 120 VAC or 28 VDC, or 0.4 VA max. at 20 VAC or VDC max.
● Common Contact and Terminals:
● Brass with gold-plate over nickel-plate.
● Normally Open and Normally Closed Contacts:
● Coin silver with gold-plate over nickel-plate.
●8X6 Models. Contact Rating:
● 6 amps at 120 VAC or 28 VDC; 3 amps at 250 VAC (816X-UL).
● Center Contact and Terminals:
● Brass, silver-plated.
● End Contacts:
● Silver, silver-plated.
●A “2” at the end of each part number indicates a black actuator; a “22” indicates a black actuator and black bezel; and a “223” indicates a black actuator, black bezel and a red LED.
● Panel Cut Out:
● 0.500 × 0.600".
●All models have epoxy terminal seal and are compatible with all in.bottom-washin. PCB Cleaning methods.
