Features and Benefits
●High Capacity
●• 600 k to 3 Million System Gates
●• 108 to 504 kbits of True Dual-Port SRAM
●• Up to 620 User I/Os
●Reprogrammable Flash Technology
●• 130-nm, 7-Layer Metal (6 Copper), Flash-Based CMOS Process
●• Instant On Level 0 Support
●• Single-Chip Solution
●• Retains Programmed Design when Powered Off
●On-Chip User Nonvolatile Memory
●• 1 kbit of FlashROM with Synchronous Interfacing
●High Performance
●• 350 MHz System Performance
●• 3.3 V, 66 MHz 64-Bit PCI
●In-System Programming (ISP) and Security
●• ISP Using On-Chip 128-Bit Advanced Encryption Standard (AES) Decryption via JTAG (IEEE 1532–compliant)
●• FlashLock® Designed to Secure FPGA Contents
●Low Power
●• Core Voltage for Low Power
●• Support for 1.5-V-Only Systems
●• Low-Impedance Flash Switches
●High-Performance Routing Hierarchy
●• Segmented, Hierarchical Routing and Clock Structure
●• Ultra-Fast Local and Long-Line Network
●• Enhanced High-Speed, Very-Long-Line Network
●• High-Performance, Low-Skew Global Network
●• Architecture Supports Ultra-High Utilization
●Pro (Professional) I/O
●• 700 Mbps DDR, LVDS-Capable I/Os
●• 1.5 V, 1.8 V, 2.5 V, and 3.3 V Mixed-Voltage Operation
●• Bank-Selectable I/O Voltages—up to 8 Banks per Chip
●• Single-Ended I/O Standards: LVTTL, LVCMOS 3.3 V /2.5 V / 1.8 V / 1.5 V, 3.3 V PCI / 3.3 V PCI-X, and LVCMOS
●2.5 V / 5.0 V Input
●• Differential I/O Standards: LVPECL, LVDS, B-LVDS, and M-LVDS
●• Voltage-Referenced I/O Standards: GTL+ 2.5 V / 3.3 V, GTL 2.5 V / 3.3 V, HSTL Class I and II, SSTL2 Class I and II, SSTL3 Class I and II
●• I/O Registers on Input, Output, and Enable Paths
●• Hot-Swappable and Cold Sparing I/Os
●• Programmable Output Slew Rate and Drive Strength
●• Programmable Input Delay
●• Schmitt Trigger Option on Single-Ended Inputs
●• Weak Pull-Up/-Down
●• IEEE 1149.1 (JTAG) Boundary Scan Test
●• Pin-Compatible Packages across the ProASIC®3E Family
●Clock Conditioning Circuit (CCC) and PLL
●• Six CCC Blocks, Each with an Integrated PLL
●• Configurable Phase-Shift, Multiply/Divide, Delay Capabilities and External Feedback
●• Wide Input Frequency Range (1.5 MHz to 350 MHz)
●SRAMs and FIFOs
●• Variable-Aspect-Ratio 4,608-Bit RAM Blocks (×1, ×2, ×4, ×9, and ×18 organizations available)
●• True Dual-Port SRAM (except ×18)
●• 24 SRAM and FIFO Configurations with Synchronous Operation up to 350 MHz
●ARM® Processor Support in ProASIC3E FPGAs
●• M1 ProASIC3E Devices—Cortex-M1 Soft Processor Available
●with or without Debug
