Product Details
●The AD5063, a member of ADI’s _nano_DAC® family, is a low power, single 16-bit, unbuffered voltage-output DAC that operates from a single 2.7 V to 5 V supply. The part offers a relative accuracy specification of ±1 LSB, and operation is guaranteed monotonic with a ±1 LSB DNL specification. The AD5063 comes with on-board resistors in a 10-lead MSOP, allowing bipolar signals to be generated with an output amplifier. The part uses a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and that is compatible with standard SPI®, QSPI™, MICROWIRE™, and DSP interface standards. The reference for the AD5063 is supplied from an external VREF pin. A reference buffer is also provided on-chip. The part incorporates a power-on reset circuit that ensures the DAC output powers up to midscale and remains there until a valid write to the device takes place. The part contains a power-down feature that reduces the current consumption of the device to typically 300 nA at 5 V and provides software-selectable output loads while in power-down mode. The part is put into power-down mode via the serial interface. Total unadjusted error for the part is <1 mV.
●This part exhibits very low glitch on power-up.
●Product Highlights
● 1. Available in 10-lead MSOP.
● 2. 16-bit accurate, 1 LSB INL.
● 3. Low glitch on power-up.
● 4. High speed serial interface with clock speeds up to 30 MHz.
● 5. Three power-down modes available to the user.
●Applications
● Process control
● Data acquisition systems
● Portable battery-powered instruments
● Digital gain and offset adjustment
● Programmable voltage and current sources
● Programmable attenuators
●### Features and Benefits
● Single 16-bit DAC, 1 LSB INL
● Power-on reset to midscale
● Guaranteed monotonic by design
● 3 power-down functions
● Low power serial interface with Schmitt-triggered inputs
● 10-lead MSOP, low power
● See data sheet for additional features
