Product Details
●The AD5165 provides a compact 2.9 mm × 2.8 mm packaged solution for 256-position adjustment applications. These devices perform the same electronic adjustment function as mechanical potentiometers or variable resistors, with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance. The AD5165’s supply voltage requirement is 2.7 V to 5.5 V, but its logic voltage requirement is 1.8 V to VDD. The AD5165 consumes very low quiescent power during standby mode and is ideal for battery-operated applications.
●Wiper settings are controlled through a simple 3-wire interface. The interface is similar to the SPI® digital interface except for the inverted chip-select function that minimizes logic power con-sumption in the idling state. The resistance between the wiper and either endpoint of the fixed resistor varies linearly with respect to the digital code transferred into the wiper register.
●Operating from a 2.7 V to 5.5 V power supply and consuming less than 50 nA typical standby power allows use in battery-operated portable or remote utility device applications.
●Note: The terms digital potentiometer, RDAC, and VR are used interchangeably.
●### Features and Benefits
● Ultralow standby power
● IDD= 50 nA typical
● 256-position
● End-to-end resistance 100 Ω
● Logic high voltage 1.8 V
● Power supply 2.7 V to 5.5 V
● Low temperature coefficient 35 ppm/°C
● Compact thin 8-lead TSOT-8
● (2.9 mm × 2.8 mm) package
● Simple 3-wire digital interface
● Wide operating temperature
● -40°C to +125°C
● Pin-to-pin compatible to
● AD5160 with CS inverted