Product Details
●The AD5305/AD5315/AD5325 are quad 8-, 10-and 12-bit buffered voltage output DACs in a 10-lead microSOIC package that operate from a single 2.5 V to 5.5 V supply consuming 500 µA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing with a slew rate of 0.7 V/µs. A 2-wire serial interface is used which operates at clock rates up to 400 kHz. This interface is SMBus-compatible at VDD <3.6 V. Multiple devices can be placed on the same bus.
●Product Highlights
● Available in a 10-lead MicroSOIC package
● Low power, single supply operation from 2.5 V to 5.5 V supply
● Consumes 1.5mW at 3 V and 3 mW at 5 V
● Rail-to-Rail output with a slew rate of 0.7 V/µs
● Multiple devices can share the same bus
● Serial interface with clock rates up to 400 kHz
● Pin- and Software-Compatible with the AD5305 (8-Bit) and the AD5325 (12-Bit)
●I2C (Inter-IC) is a trademark of Philips Semiconductors.
●### Features and Benefits
● Four 10-Bit DACS in 10-Lead MicroSOIC
● Low Power: 600 µA @ 5 V, 500 µA @ 3 V
● Power-Down to 200 nA @ 5 V, 80nA @ 3 V
● Guaranteed Monotonic by Design
● Power-On-Reset to Zero Volts
● Three Power-Down Functions
● Double-Buffered Input Logic
● Output Range: O-VREF
● 2-Wire (I2C™ Compatible)
● Data Readback Facility; Software Clear Facility
● Simultaneous Update via LDAC bit (active low)
● Temperature Range: -40°C to 105°C
