TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Number of Pins | 8 Pin |
Supply Voltage (DC) | 15.0 V |
Case/Package | DIP-8 |
Supply Current | 170 µA |
Number of Circuits | 1 Circuit |
Number of Channels | 1 Channel |
Number of Positions | 8 Position |
Power Dissipation | 500 mW |
Common Mode Rejection Ratio | 76 dB |
Input Capacitance | 3.00 pF |
Bandwidth | 1 MHz |
Slew Rate | 1.80 V/μs |
Gain Bandwidth Product | 1 MHz |
Input Impedance | 3.00 TΩ |
Input Offset Voltage | 300 µV |
Input Bias Current | 30 pA |
Operating Temperature (Max) | 70 ℃ |
Operating Temperature (Min) | 0 ℃ |
Gain Bandwidth | 1 MHz |
Power Dissipation (Max) | 500 mW |
Minimum CMRR Range | 76 dB |
Supply Voltage | 4.5V ~ 18V |
Supply Voltage (Max) | 18 V |
Supply Voltage (Min) | 4.5 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 9.27 mm |
Size-Width | 7.24 mm |
Size-Height | 3.43 mm |
Operating Temperature | 0℃ ~ 70℃ |
The AD548KNZ is a low power precision monolithic Operational Amplifier offers both low bias current (10pA maximum, warmed up) and low quiescent current (200µA maximum) and is fabricated with ion-implanted FET and laser wafer trimming technologies. Input bias current is guaranteed over the AD548"s entire common-mode voltage range. The economical J grade has a maximum guaranteed input offset voltage of less than 2mV and an input offset voltage drift of less than 20µV/°C. This level of DC precision is achieved utilizing Analog"s laser wafer drift trimming process. The combination of low quiescent current and low offset voltage drift minimizes changes in input offset voltage due to self-heating effects. The AD548 is recommended for any dual supply op amp application requiring low power and excellent DC and AC performance. In applications such as battery-powered, precision instrument front ends and CMOS DAC buffers.
● Enhanced replacement for LF441 and TL061
● Indefinite output short-circuit duration
● 200µA Maximum quiescent current
● 500mW Internal power dissipation
●ESD sensitive device, electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.
ADI
Precision, Low Power BiFET Op Amp
ADI
ANALOG DEVICES AD548JRZ Operational Amplifier, Single, 1 Amplifier, 1MHz, 1.8V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
ADI
ANALOG DEVICES AD548KNZ Operational Amplifier, Single, 1 Amplifier, 1MHz, 1.8V/µs, ± 4.5V to ± 18V, DIP, 8Pins
ADI
IC,Operational Amplifier,SINGLE,BIPOLAR/JFET,SOP,8Pin,PLASTIC
ADI
IC OPAMP GP 1MHz LP PREC 8SOIC
ADI
OP Amp Single GP ±18V 8Pin CDIP
ADI
18V; 0.5W(1/2W); precision, low power BiFET Op Amp
ADI
IC,Operational Amplifier,SINGLE,BIPOLAR/JFET,SOP,8Pin,PLASTIC
ADI
IC OPAMP GP 1MHz LP PREC 8SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.