PRODUCT DESCRIPTION
●The AD585 is a complete monolithic sample-and-hold circuit consisting of a high performance operational amplifier in series with an ultralow leakage analog switch and a FET input inte grating amplifier. An internal holding capacitor and matched applications resistors have been provided for high precision and applications flexibility.
●The performance of the AD585 makes it ideal for high speed 10- and 12-bit data acquisition systems, where fast acquisition time, low sample-to-hold offset, and low droop are critical. The AD585 can acquire a signal to ±0.01% in 3 µs maximum, and then hold that signal with a maximum sample-to-hold offset of 3 mV and less than 1 mV/ms droop, using the on-chip hold capacitor. If lower droop is required, it is possible to add a larger external hold capacitor.
●FEATURES
● 3.0 ms Acquisition Time to 60.01% max
● Low Droop Rate: 1.0 mV/ms max
● Sample/Hold Offset Step: 3 mV max
● Aperture Jitter: 0.5 ns
● Extended Temperature Range: –558C to +1258C
● Internal Hold Capacitor
● Internal Application Resistors
● 612 V or 615 V Operation
● Available in Surface Mount
●APPLICATIONS
● Data Acquisition Systems
● Data Distribution Systems
● Analog Delay & Storage
● Peak Amplitude Measurements
● MIL-STD-883 Compliant Versions Available