| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 0Hz ~ 2MHz |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 5.00V (min) |
| Case/Package | PDIP-20 |
| Supply Current | 5 mA |
| Number of Positions | 20 Position |
| Power Dissipation | 600 mW |
| Bandwidth | 2.00 MHz |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| Power Dissipation (Max) | 600 mW |
| Supply Voltage (Max) | 16.5 V |
| Supply Voltage (Min) | 5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 24.51 mm |
| Size-Width | 7.24 mm |
| Size-Height | 3.43 mm |
| Operating Temperature | -25℃ ~ 85℃ |
The AD630JNZ is a High Precision Balanced Modulator/Demodulator that combines a flexible commutating architecture with the accuracy and temperature stability afforded by laser wafer trimmed thin film resistors. The AD630 can be thought of as a precision operational amplifier with two independent differential input stages and a precision comparator that is used to select the active front end. The rapid response time of this comparator coupled with the high slew rate and fast settling of the linear amplifiers minimize switching distortion. It used in precision signal processing and instrumentation applications that require wide dynamic range. When used as a synchronous demodulator in a lock-in amplifier configuration, the AD630 can recover a small signal from 100dB of interfering noise (see the Lock-In Amplifier Applications section). Although optimized for operation up to 1kHz, the circuit is useful at frequencies up to several hundred kilohertz.
● Recovers signal from 100dB noise
● 2MHz Channel bandwidth
● 45V/µs Slew rate
● Low crosstalk
● Pin programmable, closed-loop gains of ±1 and ±2
● 0.05% Closed-loop gain accuracy and match
● 100µV Channel offset voltage
● 350kHz Full power bandwidth
●ESD sensitive device, take proper precaution while handling the device.
ADI
220 Pages / 2.19 MByte
ADI
Balanced Modulator/Demodulator
ADI
RF IC Modulator/Demodulator General Purpose 0Hz ~ 2MHz 20-SOIC W
ADI
RF Modulation / Demodulation IC, 2MHz Bandwidth, 100dB Noise, 5V to 16.5V supply, DIP-20
ADI
IC,RF Modulator/Demodulator,BIPOLAR,DIP,20Pin,CERAMIC
ADI
Balanced Modulator and Demodulator 20Pin PDIP
ADI
IC,RF Modulator/Demodulator,BIPOLAR,DIP,20Pin,CERAMIC
ADI
ANALOG DEVICES AD630BDZ MODULATOR/DEMODULATOR, 2MHz, DIP-20
ADI
IC MOD/DEMOD BAL 2MHz 20-CDIP
ADI
IC MOD/DEMOD BAL 2MHz 20-SOIC
ADI
IC MOD/DEMOD BAL 2MHz 20-CDIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
