TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Number of Pins | 14 Pin |
Operating Voltage | 4V ~ 36V |
Case/Package | DIP-14 |
Supply Current | 1.5 mA |
Number of Circuits | 4 Circuit |
Number of Channels | 4 Channel |
Number of Positions | 14 Position |
Common Mode Rejection Ratio | 132 dB |
Input Capacitance | 2.00 pF |
Bandwidth | 800 kHz |
Slew Rate | 150 mV/μs |
Gain Bandwidth Product | 800 kHz |
Input Impedance | 300 GΩ |
Input Offset Voltage | 50 µV |
Input Bias Current | 100 pA |
Operating Temperature (Max) | 70 ℃ |
Operating Temperature (Min) | 0 ℃ |
3dB Bandwidth | 800 kHz |
Minimum CMRR Range | 100 dB |
Supply Voltage (Max) | 18 V |
Supply Voltage (Min) | 2 V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 19.05 mm |
Size-Width | 6.35 mm |
Size-Height | 3.3 mm |
Operating Temperature | 0℃ ~ 70℃ |
The AD704JNZ is a picoampere input current quad bipolar Operational Amplifier that has the low input bias current of a BiFET amplifier and offers a significantly lower IB drift over temperature. It uses superbeta bipolar input transistors to achieve picoampere input bias current levels (similar to FET input amplifiers at room temperature), while its IB typically increases only by 5x at 125°C (unlike a BiFET amp, for which IB doubles every 10°C, resulting in a 1000x increase at 125°C). In addition, the AD704 achieves 150µV offset voltage and the low noise characteristics of a precision bipolar input op amp. Because it has only 1/20 the input bias current of an OP07, the AD704 does not require the commonly used balancing resistor. Furthermore, the current noise is 1/5 that of the OP07, which makes the AD704 usable with much higher source impedances. The AD704 is better suited for today"s higher density circuit boards and battery-powered applications.
● 150µV Maximum offset voltage
● 1.5µV/°C Maximum offset voltage drift
● 270pA Maximum input bias current
● 0.5µVp-p Low noise
● 0.1 to 10Hz Typical noise
● 600µA Maximum supply current per amplifier
ADI
Quad Picoampere Input Current Bipolar Op Amp
ADI
ANALOG DEVICES AD704JNZ Operational Amplifier, Quad, 4 Amplifier, 800kHz, 0.15V/µs, ± 2V to ± 18V, DIP, 14Pins
ADI
ANALOG DEVICES AD704ARZ-16 Operational Amplifier, Quad, 4 Amplifier, 800kHz, 0.15V/µs, ± 2V to ± 18V, WSOIC, 16Pins
ADI
ANALOG DEVICES AD704JRZ-16 Operational Amplifier, Quad, 4 Amplifier, 800kHz, 0.15V/µs, ± 2V to ± 18V, SOIC, 16Pins
ADI
ANALOG DEVICES AD704AR-16 Operational Amplifier, Quad, 4 Amplifier, 800kHz, 0.15V/µs, ± 2V to ± 18V, SOIC, 16Pins
ADI
IC OPAMP GP 800kHz 16SOIC
ADI
OP Amp Quad GP ±18V 20Pin CLLCC Tube
ADI
IC OPAMP GP 800kHz 16SOIC
ADI
OP Amp Quad GP ±18V 14Pin PDIP N
ADI
IC OPAMP GP 800kHz 16SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.