| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 15.0 V |
| Case/Package | SOIC-8 |
| Supply Current | 2.5 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Power Dissipation | 500 mW |
| Common Mode Rejection Ratio | 70 dB |
| Input Capacitance | 5.50 pF |
| Bandwidth | 4 MHz |
| Slew Rate | 20.0 V/μs |
| Gain Bandwidth Product | 4.00 MHz |
| Input Impedance | 3.00 TΩ |
| Input Offset Voltage | 300 µV |
| Input Bias Current | 15 pA |
| Operating Temperature (Max) | 70 ℃ |
| Operating Temperature (Min) | 0 ℃ |
| 3dB Bandwidth | 4 MHz |
| Power Dissipation (Max) | 500 mW |
| Minimum CMRR Range | 70 dB |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 5 mm |
| Size-Width | 4 mm |
| Size-Height | 1.5 mm |
| Operating Temperature | 0℃ ~ 70℃ |
The AD711JRZ is an Universal Linear Variable Differential Transformer (LVDT) Signal Conditioner used in conjunction with LVDTs to convert transducer mechanical position to a unipolar or bipolar DC voltage with a high degree of accuracy and repeatability. All circuit functions are included on the chip. With the addition of a few external passive components to set frequency and gain, the AD698 converts the raw LVDT output to a scaled DC signal. The device will operate with half-bridge LVDTs, LVDTs connected in the series opposed configuration (4-wire) and RVDTs. This conditioner contains a low distortion sine wave oscillator to drive the LVDT primary. Two synchronous demodulation channels of the AD698 are used to detect primary and secondary amplitude. The part divides the output of the secondary by the amplitude of the primary and multiplies by a scale factor.
● Settles to 0.01% in 1.0µs
● 3MHz Minimum unity gain bandwidth
● Surface mount
●ESD sensitive device, take proper precaution while handling the device.
ADI
Precision, Low Cost, High Speed, BiFET Op Amp
ADI
ANALOG DEVICES AD711JNZ Operational Amplifier, Single, 1 Amplifier, 3MHz, 20V/µs, ± 4.5V to ± 18V, DIP, 8Pins
ADI
Operational Amplifier, Single, 1 Amplifier, 4MHz, 20V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
ADI
ANALOG DEVICES AD711KNZ Operational Amplifier, Single, 1 Amplifier, 4MHz, 20V/µs, ± 4.5V to ± 18V, DIP, 8Pins
ADI
ANALOG DEVICES AD711KRZ Operational Amplifier, Single, 1 Amplifier, 4MHz, 20V/µs, ± 4.5V to ± 18V, SOIC, 8Pins
ADI
ANALOG DEVICES AD711AQ Operational Amplifier, Single, 1 Amplifier, 4MHz, 20V/µs, ± 4.5V to ± 18V, DIP, 8Pins
ADI
OP Amp Single GP ±18V 4MHz 8Pin SOIC OP Amp Single GP ±18V 4MHz 8Pin SOIC OP Amp Single GP ±18V 4MHz 8Pin SOIC
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
