| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 2.70V (min) |
| Case/Package | TSSOP-16 |
| Supply Current | 1.3 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 16 Position |
| Number of Bits | 16 Bit |
| Power Dissipation | 6.5 mW |
| Sample Rate | 500 SPS |
| Resolution (Bits) | 16.0 Bit |
| Input Capacitance | 10.0 pF |
| Input Impedance | 9.00 GΩ |
| Number of ADCs | 1 ADC |
| Number of Inputs | 2 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 1 mW |
| Number of Input Channels | 2 Channel |
| Supply Voltage (Max) | 5.25 V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 5 mm |
| Size-Width | 4.4 mm |
| Size-Height | 1.05 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The AD7705BRUZ is a complete analog front ends sigma-delta Analog-to-digital Converter (ADC) for low frequency measurement applications. This 2-channel device can accept low level input signals directly from a transducer and produce serial digital output. The devices employ a sigma-delta conversion technique to realize up to 16-bit of no missing codes performance. The selected input signal is applied to a proprietary, programmable-gain front end based around an analog modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via an on-chip control register, allowing adjustment of the filter cut-OFF and output update rate. It is ideal for use in smart, microcontroller or DSP-based systems. The device features a serial interface that can be configured for 3-wire operation. Gain settings, signal polarity and update rate selection can be configured in software using the input serial port.
● 2 Fully differential input channel ADCs
● Programmable gain front end - gains from 1 to 128
● 3-wire serial interface
● SPI™/QSPI™/MICROWIRE™/DSP compatible Schmitt-trigger input on SCLK
● Ability to buffer the analog input
● Standby current 8µA maximum
ADI
Analog to Digital Converters - ADC 3V/5V 1mW 2CH Diff 16Bit
ADI
Analog to Digital Converters - ADC 3V/5V 1mW 2CH Diff 16Bit
ADI
Analog to Digital Converters - ADC 3V/5V 1mW 2CH Diff 16Bit
ADI
3V/5V, 1mW, 2Channel Differential, 16Bit Sigma-Delta ADC
ADI
3V/5V, 1mW, 2Channel Differential, 16Bit Sigma-Delta ADC
ADI
3V/5V, 1mW, 2Channel Differential, 16Bit Sigma-Delta ADC
ADI
3V/5V, 1mW 2-/3Channel 16Bit, Sigma-Delta ADCs
ADI
Analog to Digital Converters - ADC 3V/5V 1mW 2CH Diff 16Bit
ADI
3V/5V, 1mW, 2Channel Differential, 16Bit Sigma-Delta ADC
ADI
3V/5V, 1mW 2-/3Channel 16Bit, Sigma-Delta ADCs
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
