Product Details
●The AD7951 is a 14-bit, charge redistribution, successive approximation register (SAR) architecture analog-to-digital converter (ADC) fabricated on Analog Devices, Inc."s _i_CMOS high voltage process. The device is configured through hardware or via a dedicated write only serial configuration port for input range and operating mode. The AD7951 contains a high speed 14-bit sampling ADC, an internal conversion clock, an internal reference (and buffer), error correction circuits, and both serial and parallel system interface ports. A falling edge on NVST samples the analog input on IN+ with respect to a ground sense, IN−. The AD7951 features four different analog input ranges and three different sampling modes: warp mode for the fastest throughput, normal mode for the fastest asynchronous throughput, and impulse mode where power is scaled with throughput. Operation is specified from −40°C to +85°C.
●Applications
● Process control
● Medical instruments
● High speed data acquisition
● Digital signal processing
● Instrumentation
● Spectrum analysis
● ATE
●### Features and Benefits
● Multiple pins/software programmable input ranges:
●5 V, 10 V, ±5 V, ±10 V
● Pins or serial SPI® compatible input ranges/mode selection
● Throughput
●1 MSPS (warp mode)
●800 kSPS (normal mode)
●670 kSPS (impulse mode)
● 14-bit resolution with no missing codes
● INL: ±0.3 LSB typ, ±1 LSB max (±61 ppm of FSR)
● SNR: 85 dB @ 2 kHz
● iCMOS® process technology
● See data sheet for additional features
