TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 8 Pin |
Case/Package | SOIC-8 |
Supply Current | 18.5 mA |
Number of Circuits | 1 Circuit |
Number of Channels | 1 Channel |
Number of Positions | 8 Position |
Power Dissipation | 900 mW |
Common Mode Rejection Ratio | 70 dB |
Input Capacitance | 1.20 pF |
Bandwidth | 270 MHz |
Slew Rate | 1.50 kV/μs |
Gain Bandwidth Product | 140 MHz |
Input Impedance | 500 kΩ |
Input Offset Voltage | 2 mV |
Input Bias Current | 3 µA |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
3dB Bandwidth | 270 MHz |
Power Dissipation (Max) | 900 mW |
Minimum CMRR Range | 70 dB |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 5 mm |
Size-Width | 4 mm |
Size-Height | 1.5 mm |
Operating Temperature | -40℃ ~ 85℃ |
The AD8037ARZ is a wide bandwidth voltage feedback Clamping Amplifier for use with full wave rectifier. The AD8037 is stable at a gain of two or greater. This device allows the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will clamp at these specified levels. Utilizing unique patent pending CLAMPIN™ input clamp architecture, the AD8037 offers a 10x improvement in clamp performance compared to traditional output clamping devices. In particular, clamp error is typically 3mV or less and distortion in the clamp region is minimized. This product can be used as a classical op amp or a clamp amplifier where a high and low output voltage are specified. The AD8037, which utilize a voltage feedback architecture, meet the requirements of many applications which previously depended on current feedback amplifiers. The AD8037 exhibits an exceptionally fast and accurate pulse response (16 ns to 0.01%).
● Superb clamping characteristics
● Minimized nonlinear clamping region
● Ultralow distortion and low noise
● High speed
● 3mV Clamp error
● 1.5ns Overdrive recovery
● ±3.9V Clamp input
● 2mV Offset
● 10µV/°C Drift
●ESD sensitive device, electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.
ADI
Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps
ADI
ANALOG DEVICES AD8037ARZ Operational Amplifier, Single, 1 Amplifier, 270MHz, 1.5kV/µs, ± 3V to ± 6V, SOIC, 8Pins
ADI
IC OPAMP VFB 270MHz 8SOIC
ADI
IC OPAMP VFB 270MHz 8SOIC
ADI
IC OPAMP VFB 270MHz 8SOIC
ADI
ANALOG DEVICES AD8037ANZ Operational Amplifier, Single, 1 Amplifier, 270MHz, 1500V/µs, ± 3V to ± 6V, DIP, 8Pins
ADI
IC OPAMP VF ULDIST LN 70mA 8SOIC
ADI
IC OPAMP VF ULDIST LN 70mA 8DIP
ADI
IC OPAMP VF ULDIST LN 70mA 8SOIC
ADI
Ic Opamp Vf Lp Ln Ldist 8soic
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.