Product Details
●The AD8112 is a low cost, fully buffered crosspoint switch matrix that operates on ±12 V for audio applications and ±5 V for video applications. It offers a −3 dB signal bandwidth greater than 60 MHz and channel switch times of less than 60 ns with 0.1% settling for use in both analog and digital audio. The AD8112 operated at 20 kHz has a crosstalk performance of −83 dB and isolation of 90 dB. In addition, ground/power pins surround all inputs and outputs to provide extra shielding for operation in the most demanding audio routing applications. With a differential gain and differential phase better than 0.1% and 0.1°, respectively, and a 0.1 dB flatness output of up to 10 MHz, the AD8112 is suitable for many video applications.
●The AD8112 includes eight independent output buffers that can be placed into a disabled state for paralleling crosspoint outputs so that off channel loading is minimized. The AD8112 has a gain of +2. It operates on voltage supplies of ±5 V or ±12 V while consuming only 34 mA or 31 mA of current, respectively. The channel switching is performed via a serial digital control (which can accommodate the daisy chaining of several devices) or via a parallel control, allowing updating of an individual output without reprogramming the entire array.
●The AD8112 is packaged in a 100-lead LQFP and is available over the commercial temperature range of 0°C to 70°C.
●Applications
● CCTV surveillance/DVR
● Analog/digital audio routers
● Video routers (NTSC, PAL, S-Video, SECAM)
● Multimedia systems
● Video conferencing
●### Features and Benefits
● Low cost, 16 × 8, high speed, nonblocking switch array
●Pin-compatible 16 × 16 version available (AD8113)
● Serial or parallel programming of switch array
● Serial data out allows daisy chaining control of multiple
●16 × 8 arrays to create larger switch arrays
● Output disable allows connection of multiple devices without loading the output bus
● Complete solution
●Buffered inputs
●8 output amplifiers
●Operates on ±5 V or ±12 V supplies
●Low supply current of 54 mA
● Excellent audio performance VS = ±12 V
●±10 V output swing
●0.002% THD at 20 kHz maximum 20 V p-p (RL = 600 Ω)
● Excellent video performance VS = ±5 V
● 0.1 dB gain flatness of 10 MHz
●0.1% differential gain error (RL = 1 kΩ)
●0.1° differential phase error (RL = 1 kΩ)
● Excellent ac performance
●−3 dB bandwidth 60 MHz
● Low all-hostile crosstalk of −83 dB at 20 kHz
● Reset pin allows disabling of all outputs (connected to a capacitor to ground provides power-on reset capability)
● 100-lead LQFP (14 mm × 14 mm)
