| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Case/Package | MSOP-8 |
| Supply Current | 350 µA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 1 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 90 dB |
| Bandwidth | 250 kHz |
| Slew Rate | 800 mV/μs |
| Gain Bandwidth Product | 250 kHz |
| Input Offset Voltage | 200 µV |
| Input Bias Current | 0.027 nA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| 3dB Bandwidth | 250 kHz |
| Minimum CMRR Range | 90 dB |
| Supply Voltage (Max) | 30V ~ 50V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Length | 3.2 mm |
| Size-Width | 3.2 mm |
| Size-Height | 0.95 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The AD8227ARMZ is a wide supply range Instrumentation Amplifier that requires only one external resistor to set any gain between 5 and 1000. The AD8227 is designed to work with a variety of signal voltages. A wide input range and rail-to-rail output allow the signal to make full use of the supply rails. Because the input range can also go below the negative supply, small signals near ground can be amplified without requiring dual supplies. The AD8227 operates on supplies ranging from ±1.5 to ±18V (2.2 to 36V single supply). The robust AD8227 inputs are designed to connect to real-world sensors. In addition to its wide operating range, the AD8227 can handle voltages beyond the rails. For example, with a ±5V supply, the part is guaranteed to withstand ±35V at the input with no damage. Minimum as well as maximum input bias currents are specified to facilitate open wire detection.
● Input voltage goes below ground
● Inputs protected beyond supplies
● Indefinite output short-circuit current
● 24nV/√Hz Input noise
● 350µA Typical supply current
ADI
Wide Supply Range, Rail-to-Rail Output Instrumentation Amplifier
ADI
ANALOG DEVICES AD8227ARZ Instrument Amplifier, 1 Amplifier, 200µV, 0.8V/µs, 250kHz, ± 1.5V to ± 18V, SOIC
ADI
ANALOG DEVICES AD8227ARMZ Instrument Amplifier, 1, 200V, 0.8V/ s, 250kHz, 1.5V to 18V, MSOP
ADI
ANALOG DEVICES AD8227BRZ Instrument Amplifier, 1 Amplifier, 100µV, 0.8V/µs, 250kHz, 2.2V to 36V, ± 1.5V to ± 18V, NSOIC
ADI
ANALOG DEVICES AD8227BRMZ Instrument Amplifier, 1 Amplifier, 100µV, 0.8V/µs, 250kHz, 2.2V to 36V, ± 1.5V to ± 18V, MSOP
ADI
SP Amp INSTR Amp Single R-R O/P 18V/36V 8Pin MSOP T/R
ADI
SP Amp INSTR Amp Single R-R O/P 18V/36V 8Pin SOIC N T/R
ADI
SP Amp INSTR Amp Single R-R O/P 18V/36V 8Pin SOIC N T/R
ADI
SP Amp INSTR Amp Single R-R O/P 18V/36V 8Pin MSOP T/R
ADI
INST Amp Single R-R O/P ±18V/36V 8Pin MSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
