| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 1.2 GHz |
| Number of Pins | 64 Pin |
| Supply Voltage (DC) | 3.13V (min) |
| Case/Package | LFCSP-64 |
| Number of Outputs | 8 Output |
| Number of Circuits | 1 Circuit |
| Number of Positions | 64 Position |
| Clock Speed | 800 MHz |
| Power Dissipation | 1.5 W |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 1500 mW |
| Supply Voltage | 3.135V ~ 3.465V |
| Supply Voltage (Max) | 3.465 V |
| Supply Voltage (Min) | 3.135 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tray |
| Size-Length | 9 mm |
| Size-Width | 9 mm |
| Size-Height | 0.83 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The AD9510BCPZ is a 8-output Clock Distribution IC provides a multi-output clock distribution function along with an on-chip phase-locked loop (PLL) core. The design emphasizes low jitter and phase noise to maximize data converter performance. Other applications with demanding phase noise and jitter requirements also benefit from this device. By connecting an external voltage-controlled crystal oscillator (VCXO) or voltage-controlled oscillator (VCO) to the CLK2 and CLK2B pins, frequencies of up to 1.6GHz can be synchronized to the input reference. Four outputs are low voltage positive emitter-coupled logic (LVPECL) at 1.2GHz and four are selectable as either LVDS (800MHz) or CMOS (250MHz) levels. Each output has a programmable divider that can be bypassed or set to divide by any integer up to 32. The phase of one clock output relative to another clock output can be varied by means of a divider phase select function that serves as a coarse timing adjustment.
● Low phase noise phase-locked loop core
● Reference input frequencies to 250MHz
● Programmable dual modulus pre-scalar
● Programmable charge pump (CP) current
● Separate CP supply (VCPS) extends tuning range
● Phase select for output-to-output coarse delay adjust
● Complementary metal oxide conductor (CMOS) clock outputs
● Serial control port
ADI
800MHz Clock Distribution, PLL Core, Dividers, Delay Adjust, 8Outputs
ADI
Clock Generator 0MHz to 1.6GHz Input 1200MHz Output 64Pin LFCSP EP
ADI
Clock Generator 0MHz to 1.6GHz Input 1200MHz Output 64Pin LFCSP EP T/R
ADI
ANALOG DEVICES AD9510/PCBZ Evaluation Board, PLL Clock Distribution, 800MHz, AD9510
ADI
Evaluation Board For 1.2GHz Clock Distribution Ic, Pll Core, Dividers, Delay Adjust, Eight Outputs
ADI
1.2GHz Clock Distribution IC, PLL Core, Dividers, Delay Adjust, Eight Outputs
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
