| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 8 Pin |
| Supply Voltage (DC) | 2.70 V |
| Case/Package | MSOP-8 |
| Output Current | 60mA @5V |
| Supply Current | 1.2 mA |
| Number of Circuits | 2 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 8 Position |
| Common Mode Rejection Ratio | 115 dB |
| Input Capacitance | 1.00 pF |
| Bandwidth | 80 MHz |
| Slew Rate | 13.0 V/μs |
| Gain Bandwidth Product | 30.0 MHz |
| Input Impedance | 90.0 MΩ |
| Input Offset Voltage | 40 µV |
| Input Bias Current | 3 µA |
| Operating Temperature (Max) | 125 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| 3dB Bandwidth | 80 MHz |
| Gain Bandwidth | 80 MHz |
| Minimum CMRR Range | 85dB ~ 90dB |
| Supply Voltage | 2.7V ~ 12V |
| Supply Voltage (Max) | 12V ~ 12.5V |
| Supply Voltage (Min) | 2.7 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 3 mm |
| Size-Width | 3 mm |
| Size-Height | 0.85 mm |
| Operating Temperature | -40℃ ~ 125℃ |
The ADA4841-2YRMZ is a Dual Low Noise and Distortion Rail-to-rail Output Amplifier that have a quiescent current of 1.5mA maximum. In spite of its low power consumption, this amplifier offers low wideband voltage noise performance of 2.1nV/√Hz and 1.4pA/√Hz current noise along with excellent spurious-free dynamic range (SFDR) of -105dBc at 100kHz. To maintain a low noise environment at lower frequencies, the amplifier has low 1/f noise of 7nV/√Hz and 13pA/√Hz at 10Hz. The ADA4841-2 output can swing to less than 50mV of either rail. The input common-mode voltage range extends down to the negative supply. The ADA4841-2 can drive up to 10pF of capacitive load with minimal peaking. The unity gain stable amplifier provides the performance required to efficiently support emerging 16-bit to 18-bit ADCs and is ideal for portable instrumentation, high channel count, industrial measurement and medical applications. It is ideally suited to drive the AD7685/AD7686, 16-bit PulSAR ADCs.
● Low power (1.1mA/amp)
● Low wideband noise (2.1nV/√Hz, 1.4pA/√Hz)
● Low 1/f noise
● Low distortion
● High speed
● Low offset voltage (0.3mV maximum)
● Rail-to-rail output
● Power down
●ESD sensitive device, take proper precaution while handling the device.
ADI
Low Power, Low Noise and Distortion, Rail-to-Rail Output Amplifier
ADI
ANALOG DEVICES ADA4841-2YRMZ Operational Amplifier, Dual, 2 Amplifier, 80MHz, 13V/µs, 2.7V to 12V, MSOP, 8Pins
ADI
Operational Amplifier, Dual, 2 Amplifier, 80MHz, 13V/µs, 2.7V to 12V, SOIC, 8Pins
ADI
Op Amp Dual Volt Fdbk R-R O/P ±6V/12V 8Pin MSOP T/R
ADI
ANALOG DEVICES ADA4841-2YCPZ-R7 Operational Amplifier, Dual, 2 Amplifier, 80MHz, 13V/µs, 2.7V to 12V, LFCSP, 8Pins
ADI
Op Amp Dual Volt Fdbk R-R O/P ±6V/12V 8Pin SOIC N T/R
ADI
ANALOG DEVICES ADA4841-2YCPZ-R2 Operational Amplifier, Dual, 2 Amplifier, 80MHz, 13V/µs, 2.7V to 12V, LFCSP, 8Pins
ADI
OP Amp Dual Volt Fdbk R-R O/P ±6V/12V 8Pin MSOP T/R
ADI
OP Amp Dual Volt Fdbk R-R O/P ±6V/12V 8Pin SOIC N T/R
ADI
OP Amp Dual Volt Fdbk R-R O/P 12V/±6V 8Pin LFCSP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
