| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 28 Pin |
| Digital Logic Level | SAR |
| Supply Voltage (DC) | 4.50V (min) |
| Case/Package | PLCC-28 |
| Supply Current | 1.00 mA |
| Number of Circuits | 1 Circuit |
| Number of Channels | 8 Channel |
| Number of Bits | 8 Bit |
| Power Dissipation | 15 mW |
| Sample Rate | 25 ksps |
| Power Consumption | 5 mW |
| Number of ADCs | 1 ADC |
| Number of Inputs | 4, 8 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Power Dissipation (Max) | 875 mW |
| Supply Voltage (Max) | 6 V |
| Supply Voltage (Min) | 4.5 V |
| Input Voltage | 5 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
| Size-Length | 11.43 mm |
| Size-Width | 11.43 mm |
| Size-Height | 3.68 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The ADC0844 and ADC0848 are CMOS 8-bit successive approximation A/D converters with versatile analog input multiplexers. The 4-channel or 8-channel multiplexers can be software configured for single-ended, differential or pseudo-differential modes of operation.
●The differential mode provides low frequency input common mode rejection and allows offsetting the analog range of the converter. In addition, the A/D"s reference can be adjusted enabling the conversion of reduced analog ranges with 8-bit resolution.
●The A/Ds are designed to operate from the control bus of a wide variety of microprocessors. TRI-STATE output latches that directly drive the data bus permit the A/Ds to be configured as memory locations or I/O devices to the microprocessor with no interface logic necessary.
National Semiconductor
8Bit Microprocessor Compatible A/D Converter with Multiplexer Option
TI
8Bit Microprocessor Compatible A/D Converter with Multiplexer Option
TI
Single ADC SAR 25KSPS 8Bit Parallel 28Pin PLCC Rail
TI
8Bit Microprocessor Compatible A/D Converter with Multiplexer Option 28-PLCC -40℃ to 85℃
TI
Single ADC SAR 25KSPS 8Bit Parallel 28Pin PLCC T/R
TI
8Bit Microprocessor Compatible A/D Converter with Multiplexer Option 28-PLCC -40℃ to 85℃
TI
Single ADC SAR 25KSPS 8Bit Parallel 24Pin PDIP Rail
TI
TEXAS INSTRUMENTS ADC0848CCN Analogue to Digital Converter, 8Bit, 25KSPS, Single, 4.5V, 6V, DIP
TI
8Bit Microprocessor Compatible A/D Converter with Multiplexer Option 28-PLCC -40℃ to 85℃
TI
8Bit Microprocessor Compatible A/D Converter with Multiplexer Option 28-PLCC -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
