Product Details
●The ADF420x family of dual frequency synthesizers are used to implement local oscillators in the upconversion and downconversion sections of wireless receivers and transmitters. Each synthesizer consists of a low noise, digital, phase frequency detector (PFD); a precision charge pump; a programmable reference divider; programmable A and B counters; and a dual modulus prescaler (P/P + 1). The A (6-bit) and B (11-bit) counters, in conjunction with the dual modulus prescaler (P/P + 1), implement an N divider (N = BP + A). In addition, the 14-bit reference counter (R counter) allows selectable REFIN frequencies at the PFD input. The on-chip oscillator circuitry allows the reference input to be derived from crystal oscillators.
●A complete phase-locked loop (PLL) can be implemented if the synthesizers are used with an external loop filter and voltage controlled oscillators (VCOs).
●Control of all the on-chip registers is via a simple 3-wire interface. The devices operate with a power supply ranging from 2.7 V to 5.5 V and can be powered down when not in use.
●Applications
● Wireless handsets (GSM, PCS, DCS, CDMA, WCDMA)
● Base stations for wireless radio (GSM, PCS, DCS, CDMA, WCDMA)
● Wireless LANS Communications test equipment
● CATV equipment
●### Features and Benefits
● 2.0 GHz/1.1 GHz
● 2.7 V to 5.5 V power supply
● Selectable charge pump supply (VP) allows extended tuning voltage in 3 V systems
● Selectable charge pump currents
● On-chip oscillator circuit
● Selectable dual modulus prescaler
● RF2: 32/33 or 64/65
● RF1: 32/33 or 64/65
● 3-wire serial interface
● Power-down mode
