Product Details
●The ADF5356 allows implementation of fractional-N or integer N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference frequency. The wideband microwave VCO design permits frequency operation from 6.8 GHz to 13.6 GHz at one radio frequency (RF) output. A series of frequency dividers at another frequency output permits operation from 53.125 MHz to 6800 MHz.
●The ADF5356 has an integrated VCO with a fundamental output frequency ranging from 3400 MHz to 6800 MHz. In addition, the VCO frequency is connected to divide by 1, 2, 4, 8, 16, 32, or 64 circuits that allow the user to generate RF output frequencies as low as 53.125 MHz. For applications that require isolation, the RF output stage can be muted. The mute function is both pin- and software-controllable.
●Control of all on-chip registers is through a simple 3-wire interface. The ADF5356 operates with analog and digital power supplies ranging from 3.15 V to 3.45 V, with charge pump and VCO supplies from 4.75 V to 5.25 V. The ADF5356 also contains hardware and software power-down modes.
●Applications
● Wireless infrastructure (LTE, W-CDMA, TD-SCDMA, WiMAX, GSM, PCS, DCS)
● Point to point and point to multipoint microwave links
● Satellites and very small aperture terminals (VSATs)
● Test equipment and instrumentation
● Clock generation
●### Features and Benefits
● RF output frequency range: 53.125 MHz to 13,600 MHz
● Noise floor integer channel: −227 dBc/Hz
● Noise floor fractional channel: −225 dBc/Hz
● Integrated rms jitter (1 kHz to 20 MHz): 97 fs for 6 GHz output
● Fractional-N synthesizer and integer N synthesizer
● Pin compatible to the ADF5355
● High resolution, 52-bit modulus
● Phase frequency detector (PFD) operation to 125 MHz
● Reference input frequency operation to 600 MHz
● Maintains frequency lock over −40°C to +85°C
● Low phase noise, voltage controlled oscillator (VCO)
● Programmable divide by 1, 2, 4, 8, 16, 32, or 64 output
● Analog and digital power supplies: 3.3 V
● Charge pump and VCO power supplies: 5.0 V typical
● Logic compatibility: 1.8 V
● Programmable output power level
● RF output mute function
● Supported by the ADIsimPLL design tool
