TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 16 Pin |
Supply Voltage (DC) | 5.50V (max) |
Case/Package (SI) | SOP |
Case/Package | TSSOP-16 |
Number of Outputs | 2 Output |
Contacts Type | 4PST |
Supply Current | 1 nA |
Number of Circuits | 2 Circuit |
Number of Channels | 1 Channel |
Number of Positions | 16 Position |
Drain to Source Resistance (on) (Rds) | 3.00 Ω |
Power Dissipation | 0.432 W |
Bandwidth | 55 MHz |
Number of Inputs | 8 Input |
Operating Temperature (Max) | 85 ℃ |
Operating Temperature (Min) | -40 ℃ |
3dB Bandwidth | 55 MHz |
Power Dissipation (Max) | 432 mW |
Supply Voltage | 1.8V ~ 5.5V |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube |
Size-Length | 5 mm |
Size-Width | 4.4 mm |
Size-Height | 1.05 mm |
Operating Temperature | -40℃ ~ 125℃ (TA) |
The ADG709BRUZ is a 4-channel Low Voltage CMOS Analogue Multiplexer that switches one of 4 differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input is used to enable or disable the device. When disabled, all channels are switched off. Low-power consumption and operating supply range of 1.8 to 5.5V make it ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. This multiplexer is designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance and leakage currents. On-resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies.
● ±2.5V Dual supply
● 0.75R On-resistance flatness
● 100pA Leakage current
● 14ns Switching times
● Differential 4-to-1 multiplexer
● Low power consumption
● TTL/CMOS-compatible inputs
●ESD sensitive device, take proper precaution while handling the device.
ADI
CMOS Low Voltage, 3Ω 4Channel Multiplexer
ADI
ANALOG DEVICES ADG709BRUZ 4:1 Analog Multiplexer IC, Dual, 3Ω, 1.8V to 5.5V, TSSOP-16
ADI
ANALOG DEVICES ADG709CRUZ Analogue Multiplexer / Demultiplexer, 4:1, 2, 4.5Ω, 1.8V to 5.5V, 2.5V, TSSOP, 16
ADI
* 1.8V to 5.5V single supply * ±2.5V dual supply * 3Ω on resistance * 0.75Ω on resistance flatness * 100pA leakage currents * 14ns switching times * Single 8-to-1 multiplexer ADG708 * Differential 4-to-1 multiplexer ADG709 * 16-lead TSSOP package * Low power consumption * TTL-/CMOS-compatible inputs * Qualified for automotive applications
ADI
Multiplexer Switch ICs 4:1 200MHz 4Ω CMOS
ADI
Analog Multiplexer Single 4:1 5.5V 16Pin TSSOP
ADI
IC,ANALOG MUX,SINGLE,4Channel,CMOS,TSSOP,16Pin,PLASTIC
ADI
IC 4Channel, DIFFERENTIAL MULTIPLEXER, PDSO16, MO-153AB, TSSOP-16, Multiplexer or Switch
ADI
* 1.8V to 5.5V single supply * ±2.5V dual supply * 3Ω on resistance * 0.75Ω on resistance flatness * 100pA leakage currents * 14ns switching times * Single 8-to-1 multiplexer ADG708 * Differential 4-to-1 multiplexer ADG709 * 16-lead TSSOP package * Low power consumption * TTL-/CMOS-compatible inputs * Qualified for automotive applications
ADI
Analog Multiplexer Single 4:1 16Pin TSSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.