| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Case/Package | LFCSP-20 |
| Number of Outputs | 4 Output |
| Contacts Type | DPST |
| Supply Current | 1 nA |
| Number of Circuits | 4 Circuit |
| Number of Channels | 2 Channel |
| Number of Positions | 20 Position |
| Power Dissipation | 5.00 µW |
| Bandwidth | 240 MHz |
| Number of Inputs | 8 Input |
| Operating Temperature (Max) | 85 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| 3dB Bandwidth | 240 MHz |
| Supply Voltage | 2.7V ~ 5.5V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tray |
| Size-Height | 0.83 mm |
| Operating Temperature | -40℃ ~ 85℃ |
The ADG784BCPZ is a monolithic CMOS Device comprising four 2:1 multiplexer/demultiplexers with high impedance outputs. The CMOS process provides low power dissipation yet gives high switching speed and low on resistance. The on-resistance variation is typically less than 0.5R with an input signal ranging from 0 to 5V. The bandwidth of the ADG784 is greater than 200MHz and this, coupled with low distortion (typically 0.5%), makes the part suitable for switching fast Ethernet signals. The control logic for each switch is shown in the Truth Table. These switches conduct equally well in both directions when ON and have an input signal range that extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked.
● 4R Typical low insertion loss and ON resistance
● <2R On-resistance flatness
● >200MHz Bandwidth
● Rail-to-Rail operation
● <1% Very low distortion
● Low quiescent supply current (100nA Typical)
● Fast switching times
● 10ns tON
● 4ns tOFF
● TTL/CMOS Compatible
ADI
CMOS 3V/5V, Wide Bandwidth Quad 2:1 Mux in Chip Scale
ADI
ANALOG DEVICES ADG784BCPZ 2:1 Analog Multiplexer IC, 4Circuits, 5Ω, 2.7V to 5.5V, LFCSP-20
ADI
Multiplexer Switch ICs 2:1 240MHz 2.2Ω CMOS Quad
ADI
Analog Multiplexer Quad 2:1 20Pin LFCSP EP
ADI
Analog Multiplexer Quad 2:1 20Pin LFCSP EP T/R
ADI
* Low Insertion Loss and On Resistance: 4 Typical * On-Resistance Flatness * Bandwidth >200MHz * Single 3V/5V Supply Operation * Rail-to-Rail Operation * Very Low Distortion: * Low Quiescent Supply Current (100nA Typical) * Fast Switching Times * tON 10ns * tOFF 4ns * TTL/CMOS Compatible * For Functionally Equivalent Devices in 16-Lead QSOP/ * SOIC Packages, See ADG774
ADI
Analog Multiplexer Quad 2:1 20Pin LFCSP EP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
