Product Details
●The ADL5320 incorporates a dynamically adjustable biasing circuit that allows for the customization of OIP3 and P1dB performance from 3.3 V to 5 V without the need for an external bias resistor. This feature gives the designer the ability to tailor driver amplifier performance to the specific needs of the design. This feature also creates the opportunity for dynamic biasing of the driver amplifier, where a variable supply is used to allow for full 5 V biasing under large signal conditions and then can reduce the supply voltage when signal levels are smaller and lower power consumption is desirable. This scalability reduces the need to evaluate and inventory multiple driver amplifiers for different output power requirements from 22 dBm to 26 dBm output power levels.
●The ADL5320 is also rated to operate across the wide temperature range of −40°C to +105°C for reliable performance in designs that experience higher temperatures, such as power amplifiers. The 1∕4 watt driver amplifier also covers the 400 MHz to 2700 MHz wide frequency range and only requires a few external components to be tuned to a specific band within that wide range. This high performance, broadband RF driver amplifier is well suited for a variety of wired and wireless applications including cellular infrastructure, ISM band power amplifiers, defense equipment, and instrumentation equipment. A fully populated evaluation board is available.
●The ADL5320 also delivers excellent adjacent channel power ratio (ACPR) vs. output power and bias voltage. The driver can deliver greater than 17 dBm of output power at 2140 MHz while achieving an ACPR of −55 dBc at 5 V. If the bias is reduced to 3.3 V, the −55 dBc ACPR output power reduces to 9 dBm.
●Applications
● Wireless infrastructure
● Automated test equipment
● ISM/AMR applications
●### Features and Benefits
● Operation from 400 MHz to 2700 MHz
● Gain of 16.9 dB at 880 MHz
● OIP3 of 45 dBm at 880 MHz
● P1dB of 25.4 dBm at 880 MHz
● Noise figure: 4.1 dB at 880 MHz
● Power supply voltage: 3.3 V to 5 V
● Power supply current: 44 mA to 104 mA
● Dynamically adjustable bias
● No bias resistor required
● Thermally efficient, MSL-1 rated
●SOT-89 package
● Operating temperature range:
●−40°C to +105°C
● ESD rating of ±4 kV (Class 3A)
