TYPE | DESCRIPTION |
---|
Frequency | 30MHz ~ 6GHz |
Number of Pins | 0 Pin |
Supply Current | 90.0 mA |
Operating Temperature (Max) | 105 ℃ |
Operating Temperature (Min) | -40 ℃ |
The ADL5611-EVALZ is an evaluation board for ADL5611 device. The ADL5611 is a single ended RF/IF gain block amplifier that provides broadband operation from 30MHz to 6GHz. The ADL5611 provides a low noise figure of 2.1dB with a very high OIP3 of 40.0dBm simultaneously, which delivers a high dynamic range. The ADL5611 provides a gain of 22.2dB that is stable over frequency, temperature and power supply and from device to device. For normal operation ADL5611-EVALZ evaluation board requires a single 5V/200mA power supply. The 5V power supply should be connected to the test loops labelled VCC and GND. The RF input is applied to the SMA connector labelled RFIN. The RF output is available at the SMA connector labelled RFOUT.
● High dynamic range gain block
● Input and output internally matched to 50ohm
● Integrated bias circuit
● P1dB of 21.0dBm at 900MHz
● Single 5V power supply
● Low quiescent current of 94mA
●ESD sensitive device, take proper precaution while handling the device.
ADI
30MHz to 6GHz RF/IF Gain Block
ADI
RF Amp Chip Single GP 6000MHz 5.25V 3Pin SOT-89 T/R
ADI
Evaluation Board, RF/IF Gain Block, 30MHz to 6GHz
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.