The ADM00421 is an evaluation kit for the development and evaluation of MCP2210 device. The MCP2210 Motherboard is designed to work together with the MCP2210 breakout board. The motherboard provides the test points required for measurements. It also contains the 8bit I/O expander, 4 channel and 12bit ADC, 2 kbit EEPROM, temperature sensor SPI slave devices. All devices are SPI slaves and controlled by the MCP2210. Demo software can be used to demonstrate the MCP2210 as a USB to SPI (Master) device and allow I/O control. The MCP2210 device is detected by a Windows based PC host as a Human Interface Device (HID). The accompanying software can be used to exercise the Evaluation Kit"s features. It also provides a reference point for users that want to create custom applications based on the MCP2210. The SPI Terminal Utility is a tool that allows low level data exchange at the SPI bus level.
● MCP2210 Breakout Board:
● Small plug in board with DIP form factor (2, 10 pin headers spaced at 600mil)
● Mini USB connector
● Access to the SPI bus and all the GP signals
● PICkit Serial Analyzer compatible header
● 3.3 or 5V jumper selectable VDD and able to supply up to 500mA to the rest of the system
● MCP2210 SPI slave Motherboard
● Socket insertion for MCP2210 breakout board and easily accessible test point for SPI bus, GP signal
● PICkit Serial Analyzer header to access the MCP23S08
● Potentiometer allows altering of voltage on the channel 1 ADC input
