ADM1032ARMZ-REEL Datasheet PDF - ON Semiconductor

The ADM1032ARMZ-REEL is a ±1C° remote and ±3C° local system temperature monitor in 8 pin MSOP package. This dual-channel digital thermometer and under/overtemperature alarm intended for use in PCs and thermal management systems. The device can measure the temperature of a remote thermal diode which can be located on the processor die or can be a discrete device (2N3904/06), accurate to 1°C. A novel measurement technique cancels out the absolute value of the transistor"s base emitter voltage so that no calibration is required. The IC also measures its ambient temperature. It communicates over a 2-wire serial interface compatible with system management bus (SMBus) standards. It is used in desktop and notebook computers, smart batteries, industrial controllers, telecommunications equipment, instrumentation and embedded systems.

● Supply voltage range from 3V to 5.5V

● Operating current of 170µA and standby current of 5.5µA

● Offset registers for system calibration

● 0.125°C resolution/1°C accuracy on remote channel

● Fast (up to 64 measurements per second)

● Supports SMBus alert, 4C SMBus address

● Programmable under/overtemperature limits, programmable fault queue

● 0.125°C resolution on remote channel and 1°C resolution on local channel

● Overtemperature fail-safe THERM (complementary) output, Programmable THERM (complementary) limits

● Programmable THERM (complementary) hysteresis

●ESD sensitive device, take proper precaution while handling the device.