The ADS5474 device is a 14-bit, 400-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply while providing LVDS-compatible digital outputs. This ADC is one of a family of 12-, 13-, and 14-bit ADCs that operate from 210 MSPS to 500 MSPS. The ADS5474 device has an input buffer that isolates the internal switching of the onboard track and hold (T&H) from disturbing the signal source while providing a high-impedance input. An internal reference generator is also provided to simplify the system design.
●Designed with a 1.4-GHz input bandwidth for the conversion of wide-bandwidth signals that exceed 400 MHz of input frequency at 400 MSPS, the ADS5474 device has outstanding low-noise performance and spurious-free dynamic range over a large input frequency range.
●The ADS5474 device is available in an TQFP-80 PowerPAD package. The device is built on Texas Instruments complementary bipolar process (BiCom3) and is specified over the full industrial temperature range (–40°C to +85°C).
● 400-MSPS Sample Rate
● 14-Bit Resolution, 11.2-Bits ENOB
● 1.4-GHz Input Bandwidth
● 80-dBc SFDR at 230 MHz and 400 MSPS
● 69.8-dBFS SNR at 230 MHz and 400 MSPS
● 2.2-VPP Differential Input Voltage
● LVDS-Compatible Outputs
● 2.5-W Total Power Dissipation
● 50-mW Power Down Mode
● Offset Binary Output Format
● Output Data Transitions on the Rising and Falling
●Edges of a Half-Rate Output Clock
● On-Chip Analog Buffer, Track-and-Hold, and
●Reference Circuit
● HTQFP-80 PowerPAD™ Package
●(14 mm × 14 mm footprint)
● Industrial Temperature Range:
●–40°C to +85°C
● Pin-Similar/Compatible with 12-, 13-, and
●14-Bit Family: ADS5463 and ADS5440/ADS5444
