Product Details
●The ADuCM3027/ADuCM3029 microcontroller units (MCUs) are ultra low power microcontroller systems with integrated power management for processing, control, and connectivity. The MCU system is based on the ARM Cortex-M3 processor, a collection of digital peripherals, embedded SRAM and flash memory, and an analog subsystem which provides clocking, reset, and power management capability in addition to an analog-to-digital converter (ADC) subsystem.
●The following are the key features of the ADuCM3027/ADuCM3029 MCUs:
● Industry leading ultralow power consumption.
● SensorStrobe™ for precise time synchronized sampling of external sensors.
● Works in hibernate mode, resulting in drastic current reduction in system solutions. Current consumption reduces by 10 times when using, for example, the ADXL363 accelerometer.
● Software intervention is not required after setup.
● No pulse drift due to software execution.
● Leading edge security.
● Fast encryption provides read protection to customer algorithms.
● Write protection prevents device reprogramming by unauthorized code.
● Robust operation.
● Full voltage monitoring in deep sleep modes.
● ECC support on flash.
● Parity error detection on SRAM memory.
● Failure detection of 32 kHz LFXTAL via interrupt.
●Applications
● Internet of Things (IoT)
● Smart machine, smart metering, smart building, smart city, smart agriculture
● Wearables
● Fitness and clinical
●### Features and Benefits
● EEMBC ULPBench™ score: 245.5
● Ultralow power active and hibernate modes
● Active (full on mode) < 30 μA/MHz (typical)
● Flexi™ (core in sleep, peripherals active) < 300 μA (typical)
● Hibernate (with SRAM retention) < 750 nA (typical)
● Shutdown (optional RTC active) < 60 nA (typical)
● ARM® Cortex®-M3 processor with MPU
● Up to 26 MHz with serial wire debug interface
● Power management
● Single-supply operation (VBAT): 1.74 V to 3.6 V
● Optional buck converter for improved efficiency
● Memory options
● 128 KB/256 KB of embedded flash memory with ECC
● 4 KB of cache memory to reduce active power
● 64 KB of configurable system SRAM with parity
● Up to 32 KB of SRAM retained in hibernate mode
● Safety
● Watchdog with dedicated on-chip oscillator
● Hardware CRC with programmable polynomial
● Multiparity bit protected SRAM
● ECC protected embedded flash
● Security
● TRNG
● User code protection
● Hardware cryptographic accelerator supporting AES-128, AES-256, and SHA-256
● Digital peripherals
● 3 SPI interfaces to enable glueless interface to sensors, radios, and converters
● I2C and UART interfaces
● SPORT for natively interfacing with converters and radios
● Programmable GPIOs (44 in LFCSP and 36 in WLCSP)
● 3 general-purpose timers with PWM support
● RTC and FLEX_RTC with SensorStrobe™ and time stamping
● Programmable beeper
● 25-channel DMA controller
● Clocking features
● 26 MHz clock: on-chip oscillator, external crystal oscillator
● 32 kHz clock: on-chip oscillator, low power crystal oscillator
● Integrated PLL with programmable divider
● Analog peripherals
● 12-bit SAR ADC, 1.8 MSPS, 8 channels, digital comparator
