Product Details
●The ADuCM350 is a configurable Impedance Converter and Potentiostat with current and voltage measurement capability for both Electrochemical sensors and Biosensors. It is a complete, coin cell powered, high precision, MCU integrated solution for portable device applications such as point-of-care diagnostics and body-worn devices for monitoring vital signs.
●The ADuCM350 analog front end (AFE) features a 16-bit, precision, 160 kSPS analog-to-digital converter (ADC); 0.17% precision voltage reference; 12-bit, no missing codes digital-to-analog converter (DAC); and a reconfigurable ultralow leakage switch matrix. It has 4 voltage measurement channels, up to 8 current measurement channels and an impedance measurement DFT engine. The ADuCM350 also includes an ARM Cortex-M3-based processor, memory, and all I/O connectivity to support portable meters with display, USB communication, and active sensors. The ADuCM350 is available in a 120-lead, 8 mm × 8 mm CSP_BGA and operates from −40°C to +85°C.
●To support extremely low dynamic and hibernate power management, the ADuCM350 provides a collection of power modes and features, such as dynamic and software controlled clock gating and power gating. The AFE is connected to the ARM Cortex-M3 via an advanced high performance bus (AHPB) slave interface on the advanced microcontroller bus architecture (AMBA) matrix, as well as direct memory access (DMA) and interrupt connections.
●Applications
● Point-of-care diagnostics
● Body-worn devices for monitoring vital signs
● Amperometric, voltametric, and impedometric measurements
●### Features and Benefits
●Measurement capability
●Impedance measurements
●Current measurements
● Amperometry
● Voltammetry
●Voltage measurements
● Potentiometry
●Analog performance
●160 kSPS, 16-bit, precision analog-to-digital converter (ADC)
●High precision voltage reference
●Ultra Low Leakage Configurable Switch Matrix
●12-bit digital-to-analog converter (DAC)
●Analog hardware accelerators
●Autonomous analog front-end (AFE) controller
●Direct digital synthesizer (DDS)/arbitrary waveform generator
●Receive filters
●Complex impedance measurement (DFT) engine
●Processing
●16 MHz ARM® Cortex M3 processor
●384 kB of embedded flash memory
●32 kB system SRAM
●16 kB Flash configured EEPROM
●Communication
●Input/output
●I2S and beeper interface
●LCD display controller (parallel and serial)
●LCD segment controller
●SPI, I2C, USB, and UART peripheral interfaces
●Programmable GPIOs
●Power
●Coin cell battery compatible
●2.0 V to 3.6 V hibernate operation
●2.5 V to 3.6 V active measurement range
●Power management unit (PMU)
●Power-on reset (POR) and power supply monitor (PSM)
●Packages and temperature range
●Operating temperature range: −40°C to +85°C
●Package: 120-lead, 8 mm × 8 mm CSP_BGA
● See datasheet for additional features
