ADUM4135BRWZ Datasheet PDF - ADI

The ADUM4135BRWZ is a single-channel Gate Driver specifically optimized for driving insulated gate bipolar transistors (IGBTs). Analog Devices Inc., iCoupler® technology provides isolation between the input signal and the output gate drive. It includes a Miller clamp to provide robust IGBT turn-OFF with a single-rail supply when the gate voltage drops below 2V. Operation with unipolar or bipolar secondary supplies is possible with or without the Miller clamp operation. The Analog Devices chip scale transformers also provide isolated communication of control information between the high voltage and low voltage domains of the chip. Information on the status of the chip can be read back from dedicated outputs. Control of resetting the device after a fault on the secondary is performed on the primary side of the device. Integrated onto the ADuM4135 is a de-saturation detection circuit that provides protection against high voltage short-circuit IGBT operation.

● Desaturation protection

● Isolated desaturation fault reporting

● Soft shutdown on fault

● Isolated fault and ready functions

● Output voltage range to 30V

● Output and input under-voltage lockout

● Creepage distance - 7.8mm minimum

● 20 Years lifetime for 600Vrms or 1092VDC working voltage

● <1R Output power device resistance

● 55ns Typical low propagation delay