| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 3.00V (min) |
| Case/Package | SSOP-20 |
| Rise/Fall Time | 2.5 ns |
| Number of Outputs | 2 Output |
| Output Voltage | 3.15V ~ 5.25V |
| Number of Channels | 4 Channel |
| Number of Positions | 20 Position |
| Rise Time | 3 ns |
| Isolation Voltage | 3750 Vrms |
| Switching Frequency | 125000 kHz |
| Input Voltage (Max) | 5 V |
| Input Voltage (Min) | 3.3 V |
| Output Voltage (Max) | 5.25 V |
| Output Voltage (Min) | 3.15 V |
| Output Current (Max) | 0.01 A |
| Input Current (Min) | 19 mA |
| Maximum Forward Voltage (Max) | 5.25 V |
| Fall Time (Max) | 2.5 ns |
| Fall Time (Max) | 2.5 ns |
| Operating Temperature (Max) | 105 ℃ |
| Operating Temperature (Min) | -40 ℃ |
| Supply Voltage | 3V ~ 5.5V |
| Supply Voltage (Max) | 5.5 V |
| Supply Voltage (Min) | 3 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Each |
| Size-Length | 7.5 mm |
| Size-Width | 5.6 mm |
| Operating Temperature | -40℃ ~ 105℃ |
The ADUM6211 series dual-channel Digital Isolator with isoPower® an integrated isolated DC-to-DC converter. Based on the Analog Devices, Inc., iCoupler® technology, the DC-to-DC converter provides regulated, isolated power that is adjustable between 3.15 and 5.25V. Input supply voltages can range from slightly below the required output to significantly higher. It eliminates the need for a separate, isolated DC-to-DC converter in low power, isolated designs. The iCoupler chip-scale transformer technology is used for isolated logic signals and for the magnetic components of the DC-to-DC converter. The result is a small form factor, total isolation solution. The isoPower uses high frequency switching elements to transfer power through its transformer. Take special care during printed circuit board (PCB) layout to meet emissions standards.
● Up to 150mW output power
● Dual DC-to-100Mbps (NRZ) signal isolation channels
● Soft start power supply
● Supports SPI up to 15MHz
● >25kV/µs High common-mode transient immunity
ADI
Dual-Channel Isolators with Integrated DC-DC Converter (1/1Channel Directionality)
ADI
ANALOG DEVICES ADUM6211ARSZ Digital Isolator, 2Channel, 50ns, 2.7V, 5.5V, SSOP, 20Pins
ADI
ANALOG DEVICES ADUM6211CRSZ Digital Isolator, 4Channel, 15ns, 3V, 5.5V, SSOP, 20Pins
ADI
ANALOG DEVICES ADUM6211BRSZ Digital Isolator, 2Channel, 35ns, 2.7V, 5.5V, SSOP, 20Pins
ADI
Digital Isolator 4CH 1Mbps 20Pin SSOP T/R
ADI
Digital Isolator 4CH 100Mbps 20Pin SSOP T/R
ADI
Digital Isolator 4CH 25Mbps 20Pin SSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
