AM571x Sitara ARM applications processors are built to meet the intense processing needs of the modern embedded products.
●AM571x devices bring high processing performance through the maximum flexibility of a fully integrated mixed processor solution. The devices also combine programmable video processing with a highly integrated peripheral set.
●Programmability is provided by a single-core ARM Cortex-A15 RISC CPU with Neon™ extensions and a TI C66x VLIW floating-point DSP core. The ARM processor lets developers keep control functions separate from vision algorithms programmed on the DSP and coprocessors, thus reducing the complexity of the system software.
●Additionally, TI provides a complete set of development tools for the ARM and C66x DSP, including C compilers, a DSP assembly optimizer to simplify programming and scheduling, and a debugging interface for visibility into source code execution.
●The AM571x Sitara ARM processor family is qualified according to the AEC-Q100 Standard.
● ARM® Cortex®-A15 Microprocessor Subsystem
● C66x Floating-Point VLIW DSP
● Fully Object-Code Compatible With C67x and C64x+
● Up to Thirty-two 16 × 16-Bit Fixed-Point Multiplies per Cycle
● Up to 512KB of On-Chip L3 RAM
● Level 3 (L3) and Level 4 (L4) Interconnects
● DDR3/DDR3L Memory Interface (EMIF) Module
● Supports up to DDR3-1333 (667 MHz)
● Up to 2GB across single chip select
● Dual ARM® Cortex®-M4 Coprocessors
● IVA-HD Subsystem
● Display Subsystem
● Full-HD Video (1920 × 1080p, 60 fps)
● Multiple Video Input and Video Output
● 2D and 3D Graphics
● Display Controller With DMA Engine and up to Three Pipelines
● HDMI™ Encoder: HDMI 1.4a and DVI 1.0 Compliant
● 2x Dual-Core Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
● Accelerator (BB2D) Subsystem
● Vivante™ GC320 Core
● Video Processing Engine (VPE)
● Available Single-Core PowerVR® SGX544 3D GPU
● One Video Input Port (VIP) Module
● Support for up to Four Multiplexed Input Ports
● General-Purpose Memory Controller (GPMC)
● Enhanced Direct Memory Access (EDMA) Controller
● Ethernet Subsystem
● Sixteen 32-Bit General-Purpose Timers
● 32-Bit MPU Watchdog Timer
● Five High-Speed Inter-Integrated Circuit (I2C) Ports
● HDQ™/1-Wire® Interface
● Ten Configurable UART/IrDA/CIR Modules
● Four Multichannel Serial Peripheral Interfaces (McSPI)
● Quad SPI Interface (QSPI)
● SATA Gen2 Interface
● Eight Multichannel Audio Serial Port (McASP) Modules
● SuperSpeed USB 3.0 Dual-Role Device
● High-Speed USB 2.0 Dual-Role Device
● Four MultiMedia Card/Secure Digital/Secure Digital Input Output Interfaces (MMC/SD/SDIO)
● PCI Express® 3.0 Subsystems With Two 5-Gbps Lanes
● One 2-lane Gen2-Compliant Port
● or Two 1-lane Gen2-Compliant Ports
● Dual Controller Area Network (DCAN) Modules
● CAN 2.0B Protocol
● MIPI® CSI-2 Camera Serial Interface
● Up to 215 General-Purpose I/O (GPIO) Pins
● Power, Reset, and Clock Management
● On-Chip Debug With CTools Technology
● 28-nm CMOS Technology
● 23 mm × 23 mm, 0.8-mm Pitch, 760-Pin BGA (ABC)
●All trademarks are the property of their respective owners.
